All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(3586 products available)
Ready to Ship
Ready to Ship
Prismatic Batteries
Due to its compact shape, the prismatic 300mah li polymer battery is appropriate for several applications. Because it has a metal container or a polymer shell, this battery type can pack more energy in a smaller area. Common uses of prismatic batteries are smartphones, tablets, and other slim gadgets. This design prioritizes energy density while assuring great efficiency.
Cylindrical Batteries
Although less widespread than prismatic types, cylindrical polymer lithium batteries are also available in a 300mAh capacity. Typically, these batteries have a cylindrical form, similar to the well-known 18650 lithium-ion batteries. Due to their shape, they might be used in some specific small appliances, although most commonly associated with bigger battery types. They are valued for their sturdy design and uniform energy distribution.
Coin-Cell Batteries
One of the most compact forms is the 300mAh lithium polymer coin cell battery. For devices like wearables, hearing aids, and small medical gadgets, its thin, circular form is perfect for fitting into tight places. Even with its low profile, the 300mAh capacity ensures dependable power for low-energy applications.
Tubular Batteries
The distinct format of 300mAh lithium polymer battery tubular cells is another alternative. These batteries, which are less frequently used, are built for specialized applications and high-performance situations. Small gadgets that need efficient energy packing can benefit greatly from the form. Future development in this field of battery technology may make tubular designs more widely used in the consumer electronics market.
Medical Devices
Such batteries are crucial in medical equipment such as implants, sensors, and portable diagnostic devices. Because of their light weight and high energy density, they are the best power source for crucial medical equipment employed in treatment or monitoring. Slender and light lithium polymer batteries make mobile medical devices easier to transport and use.
Smart Wearables
Such as smartwatches, fitness trackers, and health monitoring gadgets, incorporate 300mAh li polymer batteries. Due to its small size and light weight, it is appropriate for wearables since comfort is important. Wearable devices' extended operation is made possible by the battery's adequate capacity, enabling features like activity tracking and health monitoring without requiring frequent recharging.
IoT Devices
The 300mAh lithium polymer rechargeable battery powers many Internet of Things (IoT) gadgets, such as sensors and small wireless transmitters. These batteries make it possible for autonomous systems to function in smart homes, industrial settings, and environmental monitoring. In situations where batteries need to last a long time, such as remote monitoring, the lightweight design and efficiency of Li-Poly batteries are crucial.
Consumer Electronics
Slender and compact electronic items like headphones, Bluetooth speakers, and portable game consoles frequently utilize this battery. Modern gadgets demand batteries that can fit into tiny shells while providing enough energy to operate for several hours. With its high energy density and adaptability, the 300mAh Li-Poly battery satisfies this need in consumer electronics, enhancing usability and extending product life.
Remote Controls
The majority of contemporary remote controls, including TV remotes and smart home devices, are driven by a 300mAh li polymer battery. Such batteries have the ideal capacity to power low-energy devices for extended periods. These batteries are a cost-effective and dependable power source for remote control applications since they support long operation with little self-discharge.
Compact Design
A 300mAh lithium polymer battery is renowned for its compact design. The battery's slim profile is one of its main benefits, enabling use in devices with limited space, such as earbuds or smartwatches. Compared to other lithium-ion batteries, it is lighter and easier to integrate into contemporary devices.
High Energy Density
Lithium polymer batteries have a relatively high energy density. They can carry a lot of energy within a small volume. For portable gadgets that depend on lightweight batteries to work continuously, this quality is essential.
Safety and Flexibility
The polymer electrolyte employed in the 300mAh lithium polymer battery gives it added safety benefits. The possibility of leaking is decreased since it is not made like liquid electrolytes. Due to this, the battery is safer for use in thin, small electronic devices. Also, the battery can be created in various shapes and sizes to meet particular design needs.
Good Charge Retention
The battery has good charge retention and very little self-discharge, which ensures that tools are ready to use as needed. This property is especially important for portable or standby gadgets because they frequently require long intervals between charging. Utilizing the battery minimizes energy loss, enhancing its longevity and efficiency.
Precautions
The new lithium polymer battery must be handled with caution. It is advised to put on protective gloves and work in a location free of flammable materials. To stop the battery from discharging, the technician must wear an anti-static wristband and check the battery percentage on a meter.
Tools
The tools required to change the battery consist of a lithium polymer battery, a toolbox with tweezers, plastic wheels, and a spatula, a heat source like a heating mat, and a USB port with a multimeter. The battery's features and characteristics should be noted and compared with the new battery's.
Opening the Device
To do the task effectively, apply a heat source to the device's edges to weaken the adhesive holding it together. Then, using plastic wheels and a spatula, the device's cover should be carefully separated from the body.
Removing the Old Battery
The wires connecting the battery to the device's motherboard must be identified before the old battery is carefully detached from the adhesive. To avoid damaging the motherboard, the technicians used tweezers to disconnect the battery wires.
Installing the New Battery
Before connecting the new battery, the device's interior should be cleaned of any leftover adhesive. After identifying the right connector, the new battery should be connected to the device.
Closing the Device
After confirming that the battery was properly connected, a minimal quantity of adhesive was used to keep it in place. To secure the device, the technician has to apply gentle pressure on the two halves for roughly 30 seconds.
Testing the Installation
After sealing the device, the tools were disconnected, and the device was switched on to monitor performance.
Precautions
To do maintenance and repair work, a 300mAh lithium polymer battery must be handled carefully. It is advised to put on protective gloves and store the battery in a fireproof bag. At work, an anti-static wristband needs to be worn, and a battery that is healthy should be checked.
Tools
A toolbox that contains tweezers, a spatula, and a heat source like a heating mat is required to maintain the battery. A multimeter with a USB port is used to examine the battery. The device's manual should be found to assist with the elimination of components while also serving as a guide to identify replacement materials.
Battery Check
The multimeter was inserted to check the battery's voltage. The consultant then looked for physical damages, such as swelling, which might have damaged the battery. A new battery must be acquired when the existing one shows signs of damage.
Cleaning the Battery Compartment
To maintain a healthy atmosphere, the battery compartment should regularly be cleaned. The lithium polymer battery's connection should be carefully cleaned to guarantee a secure connection.
Battery Monitoring
The device's performance must be regularly assessed. If malfunctions appear, they need to be solved right away. Users should follow all instructions to prevent the battery from being overcharged.
Storage
When not in use, the battery ought to be kept in a cool, dry location. The lithium polymer battery should be put in a fireproof bag.
For portable electronic gadgets, a 300mAh lithium polymer battery is well-known for its quality and longevity. It is a popular option for consumer electronics since it combines great performance with a robust build. Premium materials are used to construct it, enhancing its sturdiness and usefulness.
Materials
Modern production methods create such batteries with high-quality materials. The cathode is made by combining lithium and an appropriate metal oxide, such as cobalt, nickel, or manganese, to make a lithium polymer gel electrolyte. A flexible polymer membrane serves as the electrolyte separator, which helps prevent short circuits and increases safety. This composition contributes to the battery's long lifespan and resistance to wear.
Durability
The 300mAh lithium polymer rechargeable battery has great longevity and can endure repeated charging and discharging cycles. It holds up well under normal operating circumstances and offers great resilience against thermal extremes, overcharging, and discharging. Many items' total durability is enhanced by the slim composite casing that protects the battery from physical stress and damage, making it easy to transport.
Quality Assurance
Renowned manufacturers create such batteries to follow strict quality protocols. The materials and production techniques are examined to guarantee that each battery meets set performance requirements. This degree of quality control guarantees effective energy delivery and consistent performance over the battery's lifespan. Also, reliable suppliers frequently back them up with warranties, supplying proof of their performance and quality.
Testing
The batteries undergo rigorous testing to assure quality. The factors that are evaluated include energy density, charge capacity, and discharge rates. In addition to being examined for their ability to function correctly and safely under different settings, durability tests are done to simulate prolonged use. This guarantees that the end user receives a product that performs properly and securely.
This battery is ideal for portable gadgets like smartwatches, headphones, and medical equipment due to its compact size and light weight.
While lithium polymer batteries employ a gel-like polymer electrolyte that enables more flexible shapes and sizes, lithium-ion batteries mostly use liquid electrolytes. Because of this distinction, lithium polymer batteries are lighter and thinner, making them ideal for portable tasks.
Even though it can function at temperatures up to 60°C, exposure to extreme heat may harm the battery and decrease its lifespan. To maintain its durability and safety, it should be kept in a cool, dry environment.
It's crucial to check the rules of the airline because particular regulations apply when taking lithium polymer batteries on flights. To transport the battery safely, keep it in a fireproof pouch and follow the right procedures.
With appropriate use, these batteries may last up to 500 charge cycles. The performance may drop with time and repeated use, but normal maintenance can help extend battery life.
Charging correctly and avoiding exposure to high or low temperatures will help extend the battery's life. It is advised to keep the battery between 20% and 80% charged for regular operations.
Polymer batteries, which are made of materials like lithium and cobalt, may be damaging to the environment if not properly recycled. To reduce environmental effects, people should learn about recycling programs and practices.
