All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(1106 products available)
Deep cycle batteries give out steady and usable energy over long periods. They are different from other batteries because they can be discharged really low many times without damage. Deep cycle batteries are the main power source for all kinds of RVs, boats, and off-grid houses.
SLA batteries
Sealed lead-acid batteries do not need maintenance and are sealed, so the liquid cannot spill. They can be valve-regulated to be Absorbent Glass Mat – AGM batteries or Gel batteries filled with silica acid jelly. They have excellent cycle lives of about 500 up to 1500 deep cycles and can be very cheap or cost-effective, like Trumpower SLA batteries suitable for all applications. However, it still needs to be clarified whether they can outperform lithium batteries.
Gel batteries
They have an acid solution turned into a gel by adding silica acid powder to strengthen it. This process then results in a thickening agent, which makes the acid jelly rather than liquid. Because of this, they do not require maintenance and will not spill. Their valve creates a solid, preventing the gas from escaping even though it will not solidify them. The battery can thus become ‘gassing’ resistant and will not solidify even if full. They are also resistant to deep discharging, about 80 percent, and extraordinarily safe in high temperatures, unlike regular lead-acid batteries, which can burst in high heat.
AGM batteries
Like other sealed lead-acid batteries, these absorb glassmat batteries are spill-proof and maintenance-free. They work by absorbing acid in glass fibers between their plates. They are better than gelled types because they charge faster, have a lower internal resistance, and can withstand high power demands. They also tolerate deep discharge well. However, it is still uncertain if they can last as long as lithium batteries.
Lithium batteries
Lithium batteries come in many types, such as lithium ferrous phosphate, lithium nickel manganese cobalt, ternary batteries, lithium polymer, and lithium iron battery. Out of all these, LiFePo batteries are the most suitable for energy storage. They have a long lifespan and can endure much deep cycling. They are safe and do not overheat. They are also the most environmentally friendly as they do not contain toxic metals. However, they are not cheap. Other lithium batteries are also available, which are more affordable, though not as good. They only last a few hundred cycles and do not tolerate deep discharge well. They also contain nickel and cadmium, which are harmful to nature.
Off-grid energy systems
People use these batteries in homes and buildings that are not connected to the main energy system. They are used in power backup systems, providing energy when the primary source is unavailable. They store extra energy from the sun or the wind when there is more than needed and distribute it when there is a shortage. Their ability to hold a lot of energy and release it at different speeds makes them useful for people who need steady energy.
Renewable energy systems
Energy from nature that can be used over and over, like energy from the sun or the wind, often needs batteries to store it for later use. 6 GFM 150 batteries are ideal for such needs because they can store a lot of energy from sources like solar panels and use it when needed. This makes it a vital part of systems that create clean, steady energy for homes, businesses, and large projects.
Power backup systems
It provides power backup for important operations like hospitals, data rooms, and emergency services. These spaces always need power, even if the main source goes out. They use 6 GFM 150 batteries within energy systems to ensure they can keep operating when power goes out. Their strength, reliability, and capability to provide energy when it is most needed make them perfect for these important jobs.
Electric vehicles(EV)
They provide power for electric cars, trains, and other forms of transport that run on electricity. These vehicles rely on large batteries to store the energy needed to travel long distances. They can also support EV fast charging stations to help power these stations. With the growing demand for electric transport, the need for powerful and versatile batteries is more important.
Mining and industrial operations
Many people in the mining and manufacturing industries use machines and tools that require battery power in areas where electricity is not readily available. These batteries are capable of powering tools, lights, and equipment in these remote areas. Moreover, people use them to support electric machines that replace traditional diesel equipment.
Technical specifications
The voltage is 12, and a typical household has a voltage of about 12. The 150 in the name means it has 150 amp hours of energy, similar to 150 gallons in a car filled with gas. It weighs 99 pounds, making it very strong and able to tackle heavy jobs for many hours. It is also 22 x 12 x 9 inches, like a big toolbox, and easy to store when not used. Like a tough sports drink bottle, it can handle over 1200 recharges without getting worn out. The special valve helps keep the inner parts safe and working well by letting nothing in or out. This is why it is used in places like houses with solar panels, offices that need spare energy, or trucks that sometimes switch to electric power.
How to install
Users have to set up multiple solar panels in a way that is best for the roof or ground location and ensures snowfall, leaves, and birds will not damage them. They also need to get the right size of the inverter to match the amount of energy the solar panels can produce. The inverter should be installed close to where the main power line enters the house and near the battery storage area. Then, they connect the solar panels to the inverter. After installing, they need to connect the system to the electric company’s meter so they can get credit for any extra energy produced, then connect the battery to the inverter to save any excess energy for use when needed.
Using methods
To start using the system, they turn on the power switch on the inverter, which will begin collecting energy from the sun. They can also choose how much of the battery power they want to use at the beginning, anywhere from full to a small amount. As the solar panels gather energy, the inverter will automatically decide whether to send it to the house, store it in the battery, or give it to the electric company. Throughout the day, the inverter will keep working to make sure all the energy is used in the best way, sending any large amounts directly to the home and only using battery storage when needed.
Product maintenance
They need to check the water regularly and add it when low so nothing inside gets too hot. They should wipe off any dirt and dust on the outside so air can move properly. Users also need to inspect the wires to ensure none are loose so everything connects well. If they notice any problems, they should fix them right away so the system continues working as it should.
Deep cycle batteries are used daily widely and provide power for various tools and equipment. But people may forget that they contain a lot of energy, and mishandling them can cause severe injuries. Here are some things to remember when using these batteries:
Proper storage
Off-grid energy systems store energy in batteries to provide power when needed. Because of this, people should not overcharge or over-discharge the batteries. Using energy-hungry appliances such as refrigerators, blenders, and power tools when the battery is empty can be tempting. However, buyers should never let it reach this state as it can cause the battery to freeze during winter.
Insulation
Large temperature swings can make the energy inside the battery unstable, leading to explosions. Elevated temperatures increase the fluid's volatility, which can easily ignite when exposed to a flame. Meanwhile, cold temperatures can prompt the battery to discharge, causing internal parts to freeze and crack.
Charge regularly
Regularly checking battery voltage levels and adding distilled water (for lead-acid batteries) can help monitor its status and prevent energy overload.
Emergency kit
People should prepare an emergency kit with safety gloves, face shields, and a fire extinguisher for battery fires caused by particle emissions, short circuits, and overheating.
MSDS knowledge
Batteries may contain hazardous substances like lead and sulfuric acid that can cause severe harm. Buyers should read the materials safety data sheet (MSDS) to know the risks and first-aid measures and dispose of them properly when the batteries are damaged or at the end of their life.
A1. It is a valve-regulated sealed lead acid battery that is 12V and has 150AH of storage capacity.
A2. Small household items like TVs, laptops, fans, and lights can run on a 6 GFM 150 battery. Medium or large appliances should not be connected to the battery for long periods or high usage.
A3. To ensure maximum safety, people should securely store batteries in a temperature-stable environment and use a battery monitoring system.
A4. It allows charging at various rates. For example, a fast charge can fully charge a battery in as little as 6 hours by using 12 amperes on the cooling setting to avoid overheating.
A5. The best option is to give them to a local recycling facility that deals with hazardous waste. For lead-acid batteries, check if the facility is certified by the EPA to safely dismantle them.
