All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(2613 products available)
Bosch Concrete Masonry Bit
The bosch drill bits set are intended to drill masonry building materials, including concrete, brick, and block. The bits are designed for endurance and power using a carbide tip to pierce tough materials. In general, these bits are crucial for any masonry construction project or concrete anchoring job.
Bosch Cobalt Blue Steel Jobber Drill Bit Set
Cobalt High-Speed Steel is used for Bosch Construction Blue Steel Jobber Drill Bit Set. The bits are suited to work on hard metal surfaces since cobalt is more difficult than standard HSS. 135-degree split points offer accurate penetration with minimal wandering. These bits are suitable for those in automotive and industrial operations who need to drill on harder materials.
Bosch Titanium Nitride Coated Steel Jobber Drill Bit Set
Bosch Titanium Nitride Coated Steel Jobber Drill Bit Set is more resilient than standard HSS drill bits due to the TiN cover. It reduces heat and wear, giving longer life to drill bits. 135-degree split points ensure exact starting. In general, the set is designed for general use in drilling through various materials, including metal and wood.
Bosch Impact Control Black Oxide Tapered Pilot Bit
The Black Oxide Tapered Pilot Bit is a tough bit for countersink screw projects. Also, the Black oxide finish improves bit endurance and resist corrosion. The tapered shape ensures proper sink depth for screws. Pilot bits are intended for contractors or builders who need consistent results in their projects involving driving screws.
Bosch Glass and Tile Bit
Applying carbide tips, the Glass and Tile Bit very gently and carefully drills through glass and porcelain tiles. It holds the material safe during drilling because of its splinter guard, which reduces cracks. The bit is heat resistant, thus making it ideal for wet or dry drilling. This bit is a highly valued professional tilers and glaziers pick.
Construction
As seen earlier, bosch drill bits come in different types, which makes them suitable for various construction tasks. Concrete masonry bits are for drilling concrete or brick walls, thus allowing quick installation of anchors or fixtures. Jobber drill bits are for drilling in metal and wood for structural components and framing.
Automotive
Bosch drill bits have various applications within the automotive industry. Cobalt bits are preferred for their hardness when drilling through tougher automotive materials, such as hardened steel or alloys. Moreover, these drill bits are used for repairs, part installation, and general maintenance work in vehicles.
Manufacturing
Bosch drill bits are common in mechanical work. Jobber drill bits are handy for more or less general purposes, especially when used on various materials in manufacturing. In tough drilling operations, such as making holes in machined parts, Cobalt High-Speed Steel bits become a choice due to their high-temperature resistance and hardness.
Carpentry and woodworking
These drill bits are crucial for carpentry and woodworking projects. Jobber drill bits are used to make accurate holes in wood before installing hardware such as hinges and locks. Those bits specially designed for wood, such as spade or auger bits, ensure efficient cutting of clean holes in various wooden materials.
Electrical and mechanical engineering
Users widely use Bosch drill bits in these industries for installing and maintaining electrical systems. The black oxide finish impact control bits is developed to easily drill or drive in one action, making it a practical tool for working around electrical wiring and installing systems. Its durability in production work means it can withstand rotationally driven forces in mechanical assemblies.
Materials
Bosch's drill bits are made from different materials by choosing the application: HSS, cobalt, and titanium nitride-coated steel for metals; tungsten carbide for masonry, glass, and tiles.
Bit sizes and lengths
These drill bits have a wide range of diameter sizes, from small 1/16 inches to larger 1/2 inches. Additionally, they come in lengths of regular-use up to 6-inch in length with extra-long versions for deep drilling.
Tip design
Bits have different tip designs, including split points (135-degree), brad points, and parabolic tips according to the material and application. These designs ensure accuracy in drilling and reduce bit walking.
Compatibility
The drill bits fit most conventional drills and impact drivers. However, special series, such as the Chuckless series, may only be compatible with specific Bosch power tools.
Durability
Strong materials like tungsten carbide and cobalt make bosch tw drill bits durable and resist wear and tear, especially under tough drilling conditions.
Precision
135-degree split points provide accurate drilling by preventing bit walking and ensuring the drill bit remains centered on the material.
Heat resistance
Coated drill bits like titanium nitride and cobalt are very much heat-resistant, making them capable of extended use without losing hardness.
Variety
Bosch offers different drill bit packs, from general-purpose bits to those designed for specific tasks, such as drilling in masonry, metal, or wood.
Choose the right bit
Select the right Bosch drill bit for the job based on the material to be drilled.
Secure the drill bit
For a keyed chuck, use the key to loosen the chuck. The key will then remove the old drill bit and replace it with a new one. Tighten the chuck around the bit securely. For a keyless chuck, hold the pro chuck and turn it to open it. Insert the bit into the chuck's jaws. Finally, tighten the chuck to secure the bit.
Set the drill mode
If using a hammer drill or other Bosch power drill, set the mode according to the task, such as drilling or hammering.
Adjust the torque and speed
Set the torque and speed for the material and bit being used. Lower torque and speed for harder materials and higher for softer ones.
Align and position
Position the drill with the drill bit on the mark where the hole is to be made. Ensure the drill is straight and aligned with the material.
Start drilling
Press the power trigger slowly to start the drill. Allow the drill bit to penetrate the material gradually. Apply moderate pressure to keep the bit in contact.
Cleaning after use
Clean the drill bits after each use. This prevents material buildup that damages the bit. Use a small brush or cloth to remove debris.
Proper storage
Store drill bits in the original case or a padded container. A padded container protects other bits from damage or breakage during storage.
Periodic inspection
Regularly inspect drill bits for wear, such as dull tips or visible chipping. This ensures that only drill bits in proper condition get used.
Sharpening
Take sharp bits to a professional for sharpening or use a sharpening tool. Some drills have a built-in sharpener. Sharpen only when the bit is worn down to ensure efficiency and precision.
Lubrication
Apply a small amount of lubricant, such as cutting oil, on the bit during use for extended life. This also reduces heat and friction.
Replacement
Bosch drill bits come with period wear and tear. However, it varies based on usage. It gets primary replacement when it starts causing inefficiency or when it gets frequent breaks.
Material Quality
Bosch uses premium materials such as cobalt and tungsten carbide in its drill bit line. These materials allow drill bits to resist wear. Also, they are hard and keep their sharpness for a long time.
Tip design
Tip shapes, including split points and parabolic, enhance drilling by providing accurate entry into materials, thus lowering drilling resistance and bit stress. Applies these designs to ensure better drilling performance, especially in hard or difficult surfaces.
Heat resistance
Coated and Cobalt drill bits are heat-resistant, thus preventing the drill bit from warping or losing hardness during extended use. This ensures safety from bit failure during work.
Breaking strength
Bosch drill bits are constructed to withstand stress. In cases of overload, the bits are designed to break rather than bend, which prevents hazardous flying shard.
Standard compliance
Bosch drill bits are made following strict international safety standards. Such compliance considers the potential risks associated with power tools and accessories and aims to minimize them, including impact resistance and bit retention.
Check point system
The Checkpoint system in the drill bit design ensures the user has the proper depth during drilling. This feature prevents over-drilling, which can compromise material integrity and cause hazardous situations.
Use of a drill guide
A Bosch drill guide ensures the bit enters straight into the material, thus lowering the chance of slippage. This contributes to safer, more precise work.
Regular inspections
One of the safety considerations is regularly inspecting for wear and tear, such as chipping or bending. Any damaged bit is replaced immediately to prevent accidents, such as bit breakage during use.
A1.Drill bits feature a 135-degree split point that facilitates penetration right into the material while lowering the drilling resistance. This center-cutting design helps keep the drill bit from walking or slipping over the material's surface when starting a hole. Therefore, the drill bit stays aligned with the intended mark, improving accuracy.
A2.Bosch drill bits are available in sizes ranging from 1/16 inches to 1/2 inches, making them ideal for various tasks. The size range allows users to make small pilot holes and larger anchor or hole saw holes.
A3.These drill bits are engineered for durability using tough materials, such as tungsten carbide and cobalt. In addition, drill bits for high-speed jobs are heat-resistant, so they won't lose their hardness in extended drilling tasks. Therefore, these bits can handle demanding tasks and won't wear out quickly.
A4.Bosch drill bits have a Checkpoint system. This system prevents over-drilling. This feature is good for stopping cuts at the desired depth. It helps protect materials from damage and reduces the risk of accidents caused by drilling too deep.
A5.
One-hundred percent. The drill bits are adaptable. The FlexiClick system allows users to change the drill chuck orientation and attach different extensions for tasks with fewer steps. It's good for tight spots or drilling at different angles. The system minimizes the number of tools needed for a job.
