All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(112981 products available)
Suppliers offer the following types of brass fittings to wholesalers in bulk.
Brass compress fittings use a compression method to join pipes or tubes. The main benefit of using these fittings is that they provide water-tight seals without the need for soldering or welding. This characteristic makes them easy to install, especially in situations where flame use is not permissible, like in enclosed areas. Often, these fittings are used in water supply systems, refrigeration, and air conditioning.
A brass plug fitting is used to close off an open end of a pipe or to plug a hole in a system. The purpose of such fittings is to effectively stop fluid flow, thereby helping to control the system or redirect its operations. These fittings have an internal thread designed to be screwed into a corresponding external thread on a pipe or equipment. Plug fittings are primarily used in systems where temporary or permanent closure is required.
Bushings are fittings used to connect two pipes of different diameters or to replace a section of pipe that has been damaged or worn out. Basically, these fittings are used to facilitate the transition or reduction of pipe sizes in a plumbing network. Suppliers say brass bushings offer strength and corrosion resistance, which makes them suitable for water and gas lines. Their durability ensures that they minimize disruptions in plumbing operations.
Brass barbed fittings are used in connecting hoses to pipes or other fittings. These fittings have ridged ends that allow the hose to be securely fastened with clamps or bands. This makes for a strong, leak-proof connection. Suppliers say these fittings are mostly used in liquid transfer systems, like garden irrigation, coolant, and fuel lines. Their corrosion-resistant property means that they can work well in harsh outdoor conditions.
Brass elbow fittings change the direction of pipes by 90 or 45 degrees, depending on the type used. An elbow pipe fitting is designed to connect two pipes at an angle, thus allowing the pipes to navigate around obstacles or shift in direction. This makes brass elbow fittings ideal for complex plumbing installations, in particular. Because brass is highly durable and resistant to corrosion, these fittings are suitable for both water and gas lines, especially in areas where the flow needs to be redirected.
Brass fitting serves many functions and come in different configurations to achieve specific requirements in plumbing and piping systems.
The primary function of brass fitting is to connect two sections of a pipe. In doing this, the fittings ensure a smooth transition for fluids, gases, or other substances passing through the system. Because of its strength and resistance to corrosion, the brass material used to make the fittings guarantees longevity and reliability in these connections.
As mentioned earlier, some brass fittings, like elbows, are designed to change the direction of pipes. Such fittings allow for more flexibility in the design of plumbing systems. It also enables easier re-routing of lines, particularly around obstacles or in confined spaces. This feature is important in complex installations where a straightforward path is not always feasible.
Certain brass fittings are intended to reduce or increase pipe size. These fittings, which include nipples and bushings, help create a more efficient system by accommodating different pipe sizes. In doing so, they ensure that the flow rate remains balanced and do not create excess pressure that may damage the system.
Brass fittings help create tight seals where two pipes meet or where a pipe connects to a fixture. In doing this, brass plumbing tools are used to prevent leaks that may affect system efficiency and even lead to harmful environmental effects in the case of gas lines. The airtight or watertight nature of these fittings will depend, however, on the quality of the material and the design employed. It is also dependent on the type of brass fittings used and how well they were integrated into the system.
Fittings are made with solid brass alloy which consists of copper, zinc, and sometimes other metals like lead or tin. The copper component provides resistance to corrosion, while zinc adds strength and durability. Lead is often used to increase malleability. However, fittings made from this material can present health hazards and are, therefore, not ideal for drinking water lines. The corrosion resistance of brass makes it ideal for use in varying temperature and pressure environments.
The key characteristic of brass is its resistance to corrosion. This property ensures that brass fittings do not degrade or lose structural integrity when constantly exposed to water, chemicals, or varying temperatures. Corrosion not only reduces the fittings' lifespan but also leads to contaminants in the fluid. Thus, the aforementioned resistance of brass fittings is key to maintaining clean fluid and operational safety.
Brass fittings are valuable to wholesale buyers for the following reasons.
Fittings are essential components in both residential and commercial plumbing. Compression fittings, for instance, provides reliable connections with minimal risk of leaking, and this makes them ideal for use in water supply lines. Due to their heat resistance, brass fittings are also utilized in the transfer of steam. Since plumbing systems are critical infrastructure in many industries, the dependability of brass fittings directly influences system performance and longevity.
Brass fittings are useful in industrial settings where often there are high-pressure and high-temperature conditions. In these environments, the durability and corrosion resistance of brass make it suitable for usage in machinery, equipment, and piping systems. For instance, brass fittings are frequently used in hydraulic systems to connect hoses and pipes and handle the fluid pressure with ease without deforming.
Brass fittings are also widely utilized in the automotive industry, in particular, for connecting cooling, fuel, and hydraulic systems. Their ability to resist wear and retard corrosion allows them to function reliably even when exposed to chemicals and varying temperatures. Aside from plumbing and industrial uses, brass fittings are also used in various electrical applications. Due to its excellent conductivity, brass serves well in connecting components in electrical systems. This ensures that the power flows smoothly with minimal energy loss.
Brass fittings are integral components of heating, ventilation, and air conditioning systems. In these systems, fittings are used to connect refrigerant lines, control valves, and other components. Because of the ability to retard leaks, maintain pressure, and withstand refrigerant chemicals, brass fittings contribute to the efficiency and reliability of HVAC operations.
For manufacturers, high-quality brass fittings are synonymous with durability and longevity. As such, these fittings will have long life spans and require little or no maintenance at all. Thus, more systems leveraging brass fittings run more efficiently while minimizing operating and labor costs. There is also reduced downtime due to the need for repairs or replacements. It is therefore a no-brainer that brass fittings are a good deal for those doing business in the automotive industry. Not only do they contribute positively to the bottom line, they are also reliable and efficient.
Brass is a copper-zinc alloy that is recyclable and therefore has much lesser impact on the environment. Many brass fittings are now made without lead, which makes for safer recycling and lower risk of soil and water contamination. This environmental aspect gives brass fittings added value as businesses look for more sustainable materials.
Wholesalers should consider these strategies when choosing brass fittings for various clients.
Brass fittings are usually made from different types of brass alloys. These include red brass, which has higher copper content for improved corrosion resistance, and yellow brass, which is relatively cheaper but offers less immunity. Each deliver varying degree of durability, corrosion resistance, and workability. Since the choice of material affects the fitting's overall performance and longevity, brass with higher copper content should be the go-to for clients requiring fittings for high-pressure or harsh chemical environments.
Clients who are likely to use their fittings in plumbing or outdoor applications will benefit from corrosion-resistant brass fittings. Such fittings are typically made from alloys containing a bit of zinc or tin, as these improve resistance to moisture and other corrosive elements. Clients with marine or irrigation activities will especially benefit from these corrosion-resistant fittings as they are likely exposed to saltwater or soil.
There are different sizes and specifications when it comes to brass fittings, so buyers should be going for those that are compatible with their client's plumbing or piping systems. Clients should be offered fittings that meet ANSI or ASTM standards. This ensures the fitting quality as well as performance and safety are assured. To further reduce operational hiccup, buyers should invest in customizable fittings for clients under unique market operations.
Brass fittings come in varying types, and each is meant for a specific application, retailer, or customer use. Just like there are also compression brass fittings that create a secure and leak-free connection without the need for solder or welding, other types include elbow fittings, bushing fittings, and plug fittings. Buyers should go for these types to suit the unique plumbing and piping needs of their clients.
The quality, performance, and safety of brass fittings can be guaranteed by those products that have undergone rigorous testing and certification. Buyers should choose fittings that have been certified by entities like the National Sanitation Foundation. These fittings pose a lower risk to water supply and meet industry-level standards. Other certifications to consider include the American Society for Testing and Materials certification.
Brass fittings are typically used in connecting, transitioning, sealing, and adjusting pipes in plumbing systems. They help control fluid, gas, or steam movement within these systems. Fittings made from brass help make strong, long-lasting connections that resist corrosion and wear over time. This, in turn, ensures that the systems' overall integrity is maintained.
Brass fittings are made from various alloys, and many of these contain lead. Lead is a highly malleable metal that improves brass workability. While lead brass fittings are extremely durable, they pose serious health hazards; hence, it is not recommended that they be used in drinking water systems. That said, there are lead-free brass fittings available that are just as sturdy and safe for drinking water. If not available, there are various strategies to manage lead-containing fittings. Such strategies consider the exposure risk, the chemical nature of the medium, and the time factor.
Various advantages that users stand to gain from using brass fittings include the following: Corrosion-resistant properties, making them suitable for many applications which involve harsh chemicals or moisture. Better thermal conductivity helps transfer heat in cooling or heating systems. Durable nature allows them to withstand high pressure and temperature without deforming. Malleability allows easy shaping and working into complex designs when the need arises.
Yes, brass fittings are worth it to wholesalers because of their durability, corrosion resistance, and flexibility. These properties make them suitable in a variety of applications, including plumbing, HVAC, and industrial machinery. Brass is also more affordable than other metals, yet it offers performance that is comparable to them. Although lead-free brass fittings are more expensive, they are still worth it to health-conscious clients. Since most of these clients use these fittings in drinking water supply systems, the expense is small compared to potential health problems.
