marine fuel oil

2.Fuel Tank Base of generator important for supplying fuel for engine and we test the fuel performance before we assemble. 8.Assemble Production line in good management and operation,ensure each generator coming our most carefull making. 9.Test for high performance Over one hour testing for each generator and we only use new oil and anti-frozen water to test, it ensures our generator coming from our most care.

It neutralize and disperse the acid compounds raised by oil oxidization. Storage and Operation Max operation temperature should not higher than 75°C. For long term storage, max temperatuer should not higher than 35°C.

The formulation is specially designed for lubrication of the crank case in marine low-speed cross-head diesel engine, trunk piston diesel engine using fuels of lower sulfur content and other anxiliary equipment. • This product should not be used for purposes other than its intended use. Certificate If you need the following lubricants: * marine cylinder oil * marine system oil * marine trunk piston engine oil * Diesel engine oil * hydraulic oil * anti-wear hydraulic oil * industry gear oil * tubrine oil * synthetic refrigerator oil * air compressor oil * heat transfer oil * Grease etc.

Marine engine oil T106 High based Synthetic Calcium Sulfonate nano fuel additive ITEM TYPICAL VALUE TEST METHOD T104 T105 T106 T106D T107 Kinematics viscosity (100 °C ),mm 2 /s 150 max 30max 200 m ax 180 m ax 150max GB/T265 Density(15.6 °C )Kg/m 3 920-960 1010-1040 1100-1140 1100-1140 1000-1100 GB/T1884 Flash point ( open ), °C 180 m in 1 7 0 m in 1 7 0 m in 180 m in 180min GB/T 3536 TBN, mg KOH/g 20~ 30 145 -165 295 m in 395 m in 395min SH/T 0251 Calcium, wt% 2.0 m in 6. 6 5 m in 11.6 m in 14.0 m in - SH/T 0297 Sulfur, wt% 2.0 m in 1.8~2.2 1.20~1.55 1.2min - SH/T 0303 Magnesium, wt% - - - - 8.5 min ASTM D-95 Dimness (JTU) 1 50 max 1 50 max 250 max 250 m ax 100max SH/T0028 Packing & Storage Process Flow Hot Recommended Transaction Process Contact Information

• Excellent anti-wear performance to reduce the friction and wear-off of metallic components and extend the engine life. • Excellent detergency and dispersancy to prevent carbon deposit at cylinder ring groove and cylinder liner and ensure the cleanness of engine combustion chamber. •Excellent diffusivity performance to drive oil quickly reaching and spreading out over the steel surface and form oil film to reduce the liner and ring wear-off.