Sewage upward to the bottom of the anaecobic reactor through pump, make use of the bottom water distributiong system, sewage evenly arranged on the whole cross section. While taking advantage of the water outlet pressure and the role of the gas production, let wastewater full contact and transfer with anaecobic sludge, degradation of organic matter in the wastewater. Is a new and high-tech enterprise specialized in environmental protection equipment, which is innoved development, manufacturing , technological design, technical services.
*7*24hrs at service After-Sales Service * Training how to instal the machine, training how to use the machine. * Engineers available to service machinery overseas. If container is too tigher,we will use pe film for packing or pack it according to customers special request.
Methane increase at the same time, the first reaction chamber in reaction mixture raised to the top of the gas-liquid separator, is separated from methane by the methane gas-liquid separator at the top of the discharge pipe to drain away. The mud mixture will be separated along the return line back to the bottom of the first reaction chamber, and with the bottom of the granular sludge and water mixing, the mixture of the reaction chamber to achieve the first inner loop. The remaining organic matter in waste water can be the second reaction chamber further degradation of anaerobic granulae sludge, the better the purification of waste water and improve water quality.
Just pls provide us the drawing or sample, we will production totally according to your required. Q: Can you provide us the design drawing9 Yeah, of course, we will provide you the drawing after you payment or prepaid. Q: Can your factory produce products according to our drawings9 Yes, we can.
The sludge separated out by sedimentation area reflows into sludge bed reaction zone. Sludge reflow equipment is often not necessary either, operation power is small. Applicable scope 1. This equipment is widely used in high concentration organic wastewater treatment.
Mastic squeezes out between the panels and the bolt head seals the shank and protects it from contact with process fluids. At this high temperature the enamel powder melts, thus forming a corrosion resistant fusion with the surface of the metal. The steel plates are separated wit each other by PE foam to avoid any damage on the coating surface.