All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(1004 products available)
Visolux sensors are produced in various types and each is designed for specific applications in sectors such as automotive, industrial, consumer electronics, and telecommunications. Here are some.
These sense light and are normally used in applications such as cameras, automatic lighting, and display brightness adjustment. They are of two types:
These are used to detect the presence of nearby objects without having to contact them. Like optical sensors, proximity sensors are also applied in automotive systems, consumer electronics (like smartphones) for screen wake-up features), and industrial automation.
These instruments measure pressure in gases and fluids and are commonly found in automotive applications (e.g. measuring tire and engine oil), industrial equipment, and HVAC systems. They can also be found in medical devices, where pressure measurement in gases or fluids is required.
These sensors measure temperature and are widely used in almost all industries. In particular, they can be found in automotive systems, industrial machinery, HVAC systems, consumer electronics (thermostats in refrigerators and air conditioning), and medical devices.
These are designed to detect sound waves and can be used in applications such as microphones and vibration sensors. Vibration sensors are used in industrial equipment monitoring, thus enabling predictive maintenance checks.
When purchasing visolux, one needs to understand the key features as they directly influence performance and suitability for specified applications.
Sensitivity is the limit to which a sensor can detect a change in the environment. High sensitivity is, therefore, important for applications requiring precise measurements, such as temperature sensors in medical devices or pressure sensors in industrial systems. On the other hand, in applications where only broad changes are sufficient, e.g. industrial machinery monitoring, low sensitivity works perfectly well.
Accuracy is how close a sensor’s readings are to the actual value while precision is about consistency in the readings. Think of it this way: a sensor can be precise but inaccurate — consistently giving the same wrong value — and it can be accurate but imprecise. Both are often required for proper functioning in environments where correct data is vital. For example, temperature sensors in pharmaceuticals need to be both accurate and precise.
This refers to the span of environmental conditions a sensor can function efficiently in. For instance, temperature sensors may operate within a range of -50°C to 150°C, while pressure sensors might handle from vacuum to several bars of pressure. When selecting a sensor, ensure its operational range meets the requirements of the intended application. Choosing a sensor outside its operational range can seriously damage the sensor and lead to inaccurate readings, not to mention system failure.
This is the time a sensor takes to respond to a change in the environment. In applications where environmental conditions change rapidly, it is absolutely crucial to use sensors with a fast response time. Examples include temperature sensors in food processing or automotive applications where delays in response can result in poor product quality or even dangerous conditions in the vehicle.
Visolux sensors are used in various industries to improve efficiency, enhance safety, monitor conditions, and facilitate automation. Below are several commercial applications of these sensors.
Visolux sensors play a major role in this industry. For example, photodiodes detect light signals in fiber-optic communication. Besides, temperature sensors monitor the heat of equipment while pressure sensors track changes in system fluids to ensure optimal performance and prevent system failures.
Pressure sensors monitor fluid and gas pressures within machinery to ensure systems operate within safe limits. This can help prevent breakdowns or safety issues. Additionally, temperature sensors are used to monitor the heat of industrial equipment like motors and pumps to enable predictive maintenance to be possible.
Acoustic sensors can detect unique engine sounds and vibrations to help with vehicle diagnostics and predictive maintenance. Note that this is done via advanced algorithms that analyze these sound patterns to identify potential issues. Also, vehicle systems utilize proximity sensors for parking assistance and collision avoidance systems, improving the vehicle's safety and convenience features.
In this industry, pressure sensors are used to measure air and refrigerant pressure in HVAC systems, thus ensuring optimal operation. Further, temperature sensors regulate indoor temperature by monitoring external and internal temperatures to provide efficient energy control.
Visolux sensors are used in smartphones to automatically adjust display brightness using photodiodes that detect ambient light. Proximity sensors help the phone turn off the display during calls, saving battery and preventing unintended actions.
Some of the factors to consider when replacing these sensors are discussed below.
A sensor being replaced should be compatible with the existing systems, both in terms of technical specifications and communication protocols. For instance, a temperature sensor that works via an analogue signal will not work in a system that requires digital data. The new sensor should have the same operational capacity regarding range, sensitivity, and accuracy. It is also key to ensure the replacement sensor is compatible with the current system software and infrastructure.
This cannot be ignored as it can be one of the major deciding factors. Buyers have to balance upfront sensor costs and potential long-term savings. For example, a more expensive sensor might offer better accuracy or lower energy costs, leading to significant savings over time. Also don’t forget about the installation cost, especially if the replacement requires changes to the current system.
The replacement sensor should ideally have a similar or faster response time than the previous one to ensure efficiency in data collection and processing. This is especially crucial in dynamic environments (like the food industry) where quick responses are vital for optimal operations). A sensor with slow response time can result in poor product quality or system failure, for instance in food processing where delays can affect the quality of the end product.
Factors like the materials used to make the new sensor, its IP rating (for dust and moisture), and the average lifespan all come into play. Moreover, consider how often the sensor will need maintenance or replacement. For instance, sensors in remote or hard-to-reach areas that require frequent maintenance should be highly durable.
A1.Yes, many are designed with robust materials and have inherent features to withstand harsh operating conditions, ensuring long-term reliability. Some have furtherenhanced moisture and dust protection.
A2.Yes, visolux sensors are sometimes tailored to specific customer applications, commonly in industrial setups where unique monitoring requirements exist. This customization could be in terms of range, housing, or output type.
A3>Some visolux sensors are specifically designed to work in high and low temperatures and are equipped with temperature-resistant materials and components to ensure optimal functionality.
A4>While many visolux sensors are equipped with self-calibration features, several others may require regular manual calibration to ensure accurate measurements.
A5>Most manufacturers offer warranty for their sensors, covering defects in materials and workmanship. However, this varies by model and manufacturer, so check the specific documentation for details.
