wika pressure gauge

STG700 SmartLine Gauge Pressure Introduction Part of the SmartLine® family of products, the STG700 and STG70L are suitable for monitoring, control and data acquisition. STG70X products feature piezoresistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy, stability and performance over a wide range of application pressures and temperatures. The SmartLine family is also fully tested and compliant with Experion ® PKS providing the highest level of compatibility assurance and integration capabilities.

Made in Japan Differential Pressure Transmitter The 530E is our traditional-mount gauge pressure transmitter in the series. 530E features include: ± 0.055% Accuracy (0.04% Accuracy optional ) ± 0.1% Stability per 10 years 90 ms Response Time Exida and TUV SIL 2/3 Certified Local Parameter Setting (LPS) Available with HART 5/7, 1 to 5V HART 7 (Low Power), FOUNDATION Fieldbus, PROFIBUS PA, or BRAIN Item # 530E-DAS4N-012NN/FF1 Model 530E: Gauge pressure transmitter Output Signal D: 4 to 20 mA DC with digital communication (BRAIN protocol) F: Digital communication (FOUNDATION Fieldbus protocol, refer to GS 01C25T02-01EN) G: Digital communication (PROFIBUS PA protocol, refer to GS 01C25T04-01EN) J: 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol) Measurement Span (Capsule) A: 10 to 200 kPa (1.45 to 29 psi) B: 0.1 to 2 MPa (14.5 to 290 psi) C: 0.5 to 10 MPa (72.5 to 1450 psi) D: 5 to 50 MPa (720 to 7200 psi) Wetted Parts Material 1 H: Process connector: HC-276; Diaphragm: HC-276; Others: HC-276 S: Process connector: 316L SST; Diaphragm: HC-276; Others: 316L SST Process Connections 4: 1/2 NPT female 7: 1/2 NPT male 8: G1/2 DIN 16 288 male 9: M20x1.5 DIN 16 288 male Amplifier Housing 1: Cast aluminum alloy 2: ASTM CF-8M stainless steel 3: Cast aluminum alloy with corrosion resistance properties Electrical Connection 0: G1/2 female, one electrical connection without blind plugs 2: 1/2 NPT female, two electrical connections without blind plugs 4: M20 female, two electrical connections without blind plugs 5: G1/2 female, two electrical connections and a blind plug 7: 1/2 NPT female, two electrical connections and a blind plug 9: M20 female, two electrical connections and a blind plug A: G1/2 female, two electrical connections and a 316 SST blind plug C: 1/2 NPT female, two electrical connections and a 316 SST blind plug D: M20 female, two electrical connections and a 316 SST blind plug Integral Indicator D: Digital indicator E: Digital indicator with the range setting switch (push button) N: None Mounting Bracket L: 316 SST 2-inch pipe mounting N: None Select Approval CF1: Canadian Standards Association (CSA) - Explosionproof Approval CS1: Canadian Standards Association (CSA) - Intrinsically safe Approval CU1: Canadian Standards Association (CSA) - Combined CF1 and CS1 FF1: FM Explosionproof Approval FS1: FM Intrinsically safe Approval FU1: FM Combined FF1 and FS1 KF22: ATEX - Flameproof Approval KS21: ATEX - Intrinsically safe Approval KU22: ATEX - Combined KF22, KS21 and ATEX Intrinsically safe Ex ic SF2: IECEx Scheme - Flameproof Approval SU21: IECEx Intrinsically safe and Flameproof Approval Packaging & Shipping

STG700 SmartLine Gauge Pressure Introduction Part of the SmartLine® family of products, the STG700 and STG70L are suitable for monitoring, control and data acquisition. STG70X products feature piezoresistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy, stability and performance over a wide range of application pressures and temperatures. The SmartLine family is also fully tested and compliant with Experion ® PKS providing the highest level of compatibility assurance and integration capabilities.

Made in Japan Differential Pressure Transmitter The 438E is a gauge pressure transmitter with a remote diaphragm seal in the series. 438E Standard features include: ± 0.2% Accuracy 200 ms Response Time Exida and TUV SIL2 / SIL3 Certified Local Parameter Setting (LPS) 10-segment Signal Characterizer Active Capillary Fill Fluid Density Compensation Model 438E: Diaphragm Sealed Gauge Pressure Transmitter Output Signal D: 4 to 20 mA DC with digital communication (BRAIN protocol) F: Digital communication (FOUNDATION Fieldbus protocol, refer to GS 01C25T02-01EN) G: Digital communication (PROFIBUS PA protocol, refer to GS 01C25T04-01EN) J: 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol) Measurement Span (Capsule) 1 A: 0.06 to 3.5 MPa (8.6 to 500 psi) B: 0.46 to 16 MPa (67 to 2300 psi) Coverflange Bolts and Nuts Material C: 660 SST G: 316L SST J: B7 carbon steel Installation 9: Horizontal piping and left side high pressure Amplifier Housing 1: Cast aluminum alloy 2: ASTM CF-8M stainless steel 3: Cast aluminum alloy with corrosion resistance properties Electrical Connection 0: G1/2 female, one electrical connection without blind plugs 2: 1/2 NPT female, two electrical connections without blind plugs 4: M20 female, two electrical connections without blind plugs 5: G1/2 female, two electrical connections and a blind plug 7: 1/2 NPT female, two electrical connections and a blind plug 9: M20 female, two electrical connections and a blind plug A: G1/2 female, two electrical connections and a 316 SST blind plug C: 1/2 NPT female, two electrical connections and a 316 SST blind plug D: M20 female, two electrical connections and a 316 SST blind plug Packaging & Shipping

Made in Japan Differential Pressure Transmitter The 430E is our traditional-mount gauge pressure transmitter in the series. 430E features include: ± 0.055% Accuracy (0.04% Accuracy optional ) ± 0.1% Stability per 10 years 90 ms Response Time Exida and TUV SIL 2/3 Certified Local Parameter Setting (LPS) Available with HART 5/7, 1 to 5V HART 7 (Low Power), FOUNDATION Fieldbus, PROFIBUS PA, or BRAIN Model 430E: Gauge pressure transmitter Output Signal D: 4 to 20 mA DC with digital communication (BRAIN protocol) F: Digital communication (FOUNDATION Fieldbus protocol, refer to GS 01C25T02-01EN) G: Digital communication (PROFIBUS PA protocol, refer to GS 01C25T04-01EN) J: 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol) Measurement Span (Capsule) H: 5 to 500 kPa (20 to 2000 inH2O) A: 0.03 to 3.5 MPa (4.3 to 500 psi) B: 0.14 to 16 MPa (20 to 2300 psi) Wetted Parts Material 1 A: Fl/ProC/Cap: HC-276 equivalent; Cap gask: PTFE; V/D plug: HC-276 B: Fl/ProC: Mo equivalent; Cap: Mo; Cap gask: PTFE; V/D plug: Mo D: Fl/ProC: HC-276 equivalent; Cap: Ta; Cap gask: PTFE; V/D plug: HC-276 H: Fl/ProC: ASTM CF-8M; Cap: HC ; Cap gask: PTFE; V/D plug: 316 SST M: Fl/ProC: ASTM CF-8M; Cap: Mo; Cap gask: PTFE; V/D plug: 316 SST S: Fl/ProC: ASTM CF-8M; Cap: HC (Diap), 316 SST (Others); Cap gask: PTFE-316L SST; V/D plug: 316 SST T: Fl/ProC: ASTM CF-8M; Cap: Ta; Cap gask: PTFE; V/D plug: 316 SST Process Connections (High Side) 0: without process connector (Rc1/4 female cover flange) 1: with Rc1/4 female process connector 2: with Rc1/2 female process connector 3: with 1/4 inch NPT female process connector 4: with 1/2 inch NPT female process connector 5: without process connector (1/4 inch NPT female cover flange) Bolts and Nuts Material C: 660 SST G: 316L SST J: B7 carbon steel Installation 3: Vertical piping, right side high pressure, and process connection down side 7: Vertical piping, left side high pressure, and process connection downside 8: Horizontal piping and right side high pressure 9: Horizontal piping and left side high pressure B: Bottom Process Connection, left side high pressure U: Universal flange Amplifier Housing 1: Cast aluminum alloy 2: ASTM CF-8M stainless steel 3: Cast aluminum alloy with corrosion resistance properties Electrical Connection 0: G1/2 female, one electrical connection without blind plugs 2: 1/2 NPT female, two electrical connections without blind plugs 4: M20 female, two electrical connections without blind plugs 5: G1/2 female, two electrical connections and a blind plug 7: 1/2 NPT female, two electrical connections and a blind plug 9: M20 female, two electrical connections and a blind plug A: G1/2 female, two electrical connections and a 316 SST blind plug C: 1/2 NPT female, two electrical connections and a 316 SST blind plug D: M20 female, two electrical connections and a 316 SST blind plug Integral Indicator D: Digital indicator E: Digital indicator with the range setting switch (push button) N: None Mounting Bracket B: 304 SST 2-inch pipe mounting, flat type D: 304 SST 2-inch pipe mounting, L type J: 316 SST 2-inch pipe mounting, flat type K: 316 SST 2-inch pipe mounting, L type N: None Select Approval CF1: Canadian Standards Association (CSA) - Explosionproof Approval CS1: Canadian Standards Association (CSA) - Intrinsically safe Approval CU1: Canadian Standards Association (CSA) - Combined CF1 and CS1 FF1: FM Explosionproof Approval FS1: FM Intrinsically safe Approval FU1: FM Combined FF1 and FS1 KF22: ATEX - Flameproof Approval KS21: ATEX - Intrinsically safe Approval KU22: ATEX - Combined KF22, KS21 and ATEX Intrinsically safe Ex ic SF2: IECEx Scheme - Flameproof Approval SU21: IECEx Intrinsically safe and Flameproof Approval Packaging & Shipping

Made in Japan Differential Pressure Transmitter The 440E is our traditional-mount high gauge pressure transmitter in the series. 440E Standard features include: ± 0.055% Accuracy ± 0.1% Stability per 10 years 90 ms Response Time Exida and TUV SIL 2/3 Certified Local Parameter Setting (LPS) Available with HART 5/7, 1 to 5 VDC HART 7 (Low Power), FOUNDATION Fieldbus, PROFIBUS PA, or BRAIN Model 440E: Gauge pressure transmitter Output Signal D: 4 to 20 mA DC with digital communication (BRAIN protocol) F: Digital communication (FOUNDATION Fieldbus protocol, refer to GS 01C25T02-01EN) G: Digital communication (PROFIBUS PA protocol, refer to GS 01C25T04-01EN) J: 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol) Measurement Span (Capsule) C: 5 to 32 MPa (720 to 4500 psi) D: 5 to 50 MPa (720 to 7200 psi) Wetted Parts Material 1 S: Fl: F316 SST; ProC: ASTM CF-8M; Cap: HC (Diap), 316L SST (Others); Cap gask: PTFE-316L SST; V/D plug: 316 SST Process Connections (High Side) 3: with 1/4 inch NPT female process connector 4: with 1/2 inch NPT female process connector 5: without process connector (1/4 inch NPT female cover flange) Bolts and Nuts Material C: 660 SST G: 316L SST J: B7 carbon steel Installation 3: Vertical piping, right side high pressure, and process connection down side 7: Vertical piping, left side high pressure, and process connection downside 8: Horizontal piping and right side high pressure 9: Horizontal piping and left side high pressure Amplifier Housing 1: Cast aluminum alloy 2: ASTM CF-8M stainless steel 3: Cast aluminum alloy with corrosion resistance properties Electrical Connection 0: G1/2 female, one electrical connection without blind plugs 2: 1/2 NPT female, two electrical connections without blind plugs 4: M20 female, two electrical connections without blind plugs 5: G1/2 female, two electrical connections and a blind plug 7: 1/2 NPT female, two electrical connections and a blind plug 9: M20 female, two electrical connections and a blind plug A: G1/2 female, two electrical connections and a 316 SST blind plug C: 1/2 NPT female, two electrical connections and a 316 SST blind plug D: M20 female, two electrical connections and a 316 SST blind plug Integral Indicator D: Digital indicator E: Digital indicator with the range setting switch (push button) N: None Packaging & Shipping