Exploring Spare Part Proton: Technical Specifications, Performance, and Engineering Applications

Types of Proton Spare Parts

A Proton spare part refers to any component used for the maintenance, repair, or enhancement of Proton vehicles—Malaysia’s national car manufacturer known for models like the Proton Saga, Persona, X70, and Iriz. These parts are essential for preserving vehicle performance, safety, and longevity.

Proton spare parts are broadly categorized into two main types: OEM (Original Equipment Manufacturer) and aftermarket. OEM parts are produced by or for Proton itself, ensuring perfect compatibility and adherence to factory specifications. Aftermarket parts, made by third-party manufacturers, offer cost-effective alternatives and sometimes performance upgrades, though quality can vary significantly.

With a wide range of systems involved in modern vehicles, Proton spare parts are segmented based on their function within the car. Below is a detailed breakdown of the most common and critical categories available in the market today.

Proton Campro Engine Parts

The Campro engine series is the heart of most Proton vehicles, known for its efficiency and reliability. Regular maintenance with quality spare parts ensures optimal power delivery and fuel economy.

• Engine Oil & Filters: Essential for lubrication and engine cleanliness.
• Air Filters: Improve combustion efficiency and protect internal components.
• Spark Plugs: Ensure consistent ignition for smooth engine performance.
• Timing Belts/Chains: Critical for synchronizing engine valves and pistons.
• Coolant & Thermostats: Prevent overheating and maintain thermal balance.
• Valve Clearance Components: Help maintain engine efficiency and reduce noise.

Best for: Routine servicing, performance tuning, and high-mileage vehicles

Proton Gearbox & Transmission Parts

The transmission system controls power delivery from the engine to the wheels. Proper functioning is vital for smooth gear shifts and drivability.

• Clutch Kits: Include clutch plates, pressure plates, and release bearings (manual transmissions).
• Gears & Shafts: Transmit torque efficiently through the gearbox.
• Synchronizers: Enable smooth gear engagement and reduce wear.
• Bearings & Seals: Reduce friction and prevent fluid leakage.
• Transmission Fluids: Lubricate and cool automatic and CVT systems.

Best for: Manual transmission servicing, gear shift refinement, and towing applications

Proton Suspension Components

The suspension system connects the vehicle to its wheels, ensuring ride comfort, handling stability, and tire contact with the road.

• Shock Absorbers & Struts: Dampen road impacts and control body movement.
• Springs: Support vehicle weight and absorb road shocks.
• Control Arms: Link the chassis to the suspension system.
• Bushings: Reduce noise, vibration, and harshness (NVH) at pivot points.
• Stabilizer Bar Links & Bushings: Minimize body roll during cornering.

Best for: Comfort-focused driving, handling upgrades, and uneven road conditions

Proton Body & Trim Parts

These components define the vehicle’s appearance and interior comfort, playing a key role in aesthetics, safety, and aerodynamics.

• Exterior Parts: Doors, hoods, bumpers, fenders, side mirrors, and windows.
• Interior Trim: Dashboards, door panels, center consoles, and trim accents.
• Seals & Weatherstripping: Prevent water and noise intrusion.
• Light Housings: Headlight, taillight, and fog light assemblies.
• Emblems & Badges: Brand identification and customization.

Best for: Accident repair, cosmetic restoration, and personalization

Proton Electrical System Components

Modern Proton vehicles rely heavily on electrical systems for operation, safety, and convenience features.

• Battery: Powers the starter and onboard electronics.
• Alternator: Charges the battery and powers the electrical system when the engine runs.
• Starter Motor: Initiates engine cranking.
• Wiring Harnesses: Connect various electrical components throughout the vehicle.
• Lights & Switches: Include headlights, brake lights, interior lights, and control switches.
• Sensors & ECUs: Monitor engine performance, emissions, and safety systems.

Best for: Diagnosing electrical faults, upgrading lighting, and improving reliability

Proton Brake System Parts

Safety-critical components that ensure reliable stopping power under all driving conditions.

• Brake Pads & Shoes: Create friction against rotors or drums to slow the vehicle.
• Brake Discs (Rotors) & Drums: Wear surfaces that absorb braking heat and energy.
• Brake Calipers & Wheel Cylinders: Apply pressure to the pads or shoes.
• Brake Lines & Hoses: Transport brake fluid under high pressure.
• Master Cylinder: Generates hydraulic pressure for the braking system.
• ABS Sensors & Modules: Enable anti-lock braking for improved control.

Best for: Safety maintenance, performance driving, and extended brake life

Component Type	Key Functions	OEM Availability	Aftermarket Options	Maintenance Frequency
Engine Parts	Power generation, efficiency, cooling	High	Extensive	Every 10,000–20,000 km
Gearbox Parts	Torque transfer, gear shifting	High	Moderate	Every 40,000–60,000 km
Suspension Parts	Ride comfort, stability, handling	Moderate	Extensive	Every 60,000–80,000 km
Body & Trim	Aesthetics, protection, aerodynamics	High	Wide variety	As needed (accident/damage)
Electrical Components	Power distribution, lighting, control	High	Moderate to high	Varies by component
Brake Parts	Stopping power, safety, control	Very High	Extensive	Every 20,000–50,000 km

Expert Tip: When replacing Proton spare parts, always verify part numbers and compatibility—especially with aftermarket components. Using OEM parts or certified equivalents ensures optimal fit, function, and warranty coverage.

Specifications and Maintenance of Proton Spare Parts

Proton vehicles rely on a range of high-performance spare parts engineered to meet strict standards for durability, safety, and efficiency. Understanding the technical specifications of these components and adhering to proper maintenance practices ensures optimal vehicle performance, extends part lifespan, and enhances driving safety. This guide explores key Proton spare parts across major systems—engine, suspension, brakes, body, and electrical—with detailed specifications and recommended maintenance routines.

Proton Engine Spare Parts: Precision and Durability

Key Specifications

Cylinder head gaskets are critical for maintaining compression and preventing fluid leakage between the engine block and cylinder head. In Proton engines, these gaskets typically range from 0.5 to 1.5 mm in thickness, depending on the engine model and combustion chamber design. They are constructed from advanced materials such as:

• Multilayer Steel (MLS): Offers superior heat resistance and durability under high pressure.
• Composite Rubber: Provides flexibility and effective sealing in moderate-performance engines.
• Graphite-Coated Gaskets: Used in turbocharged variants for enhanced thermal stability.

These materials are selected based on engine load, operating temperature, and emission requirements.

Maintenance Best Practices

To preserve engine integrity and performance:

• Follow the Service Schedule: Adhere to Proton’s recommended intervals for oil changes (typically every 5,000–10,000 km).
• Use Quality Oil and Filters: Replace engine oil and oil filters simultaneously to prevent contaminants from circulating through the system.
• Monitor for Leaks: Inspect gaskets and seals regularly for signs of oil seepage or coolant mixing, which may indicate gasket failure.
• Avoid Overheating: Ensure the cooling system is functioning properly, as excessive heat can warp components and compromise gasket integrity.

Proton Suspension Spare Parts: Stability and Comfort

Key Specifications

The suspension system ensures ride comfort, handling precision, and tire contact with the road. Key specifications include:

• Shock Absorbers: Damping force ranges from 1000 to 2000 N/S, calibrated to absorb road impacts without excessive rebound.
• Springs: Coil spring lengths vary between 300 to 400 mm, designed to support the vehicle’s weight while allowing sufficient travel over bumps.
• Strut Mounts and Bushings: Made from rubber or polyurethane to reduce vibration transfer and maintain alignment.

These components are tuned for balance between comfort and control, especially on Malaysia’s mixed road conditions.

Maintenance Best Practices

To extend suspension life and ensure safety:

• Maintain Proper Tire Pressure: Underinflated tires increase stress on shocks and struts. Check pressure monthly or before long trips.
• Avoid Harsh Driving: Minimize driving over potholes or speed bumps at high speed to prevent damage to shock absorbers and control arms.
• Lift the Vehicle When Parked on Rough Terrain: Using jack stands or ramps can reduce strain on springs and bushings.
• Inspect Regularly: Look for leaking fluid from shocks, cracked springs, or worn bushings during routine checks.

Proton Brake Spare Parts: Safety and Reliability

Key Specifications

Brake components are engineered to meet stringent safety standards. Important specifications include:

• Brake Pads: Feature a friction coefficient between 0.35 and 0.45, ensuring strong grip on brake discs without excessive wear or noise.
• Brake Discs: Must maintain a minimum thickness as specified in the owner’s manual (usually 18–22 mm depending on model). Worn discs can crack or warp under heat stress.
• Brake Lines: High-pressure rubber or braided stainless steel lines ensure consistent hydraulic performance.

These specifications ensure reliable stopping power in both city and highway driving.

Maintenance Best Practices

To maintain braking efficiency and safety:

• Check Brake Fluid Level Monthly: Top up with DOT 4 compliant fluid if low. Replace fluid every 2 years to prevent moisture buildup.
• Inspect for Leaks: Examine brake lines, calipers, and master cylinder for signs of fluid leakage.
• Monitor Pad and Disc Wear: Listen for squealing noises or reduced braking response—signs that pads or discs need replacement.
• Drive Smoothly: Avoid sudden stops to reduce wear on brake components.

Proton Body Spare Parts: Protection and Aesthetics

Key Specifications

Body components are designed for safety, aerodynamics, and durability:

• Bumpers: Must pass low-speed crash tests (typically 5–15 km/h) to protect passengers and reduce repair costs. Include energy-absorbing foam and pedestrian impact protection features.
• Fenders and Panels: Made from galvanized steel or lightweight composites to resist rust and denting.
• Windows: Constructed from tempered safety glass with thicknesses varying by model (commonly 4–6 mm). Side and rear windows may have tinting for UV protection.

These features enhance occupant safety and vehicle longevity in tropical climates.

Maintenance Best Practices

To preserve the vehicle’s appearance and structural integrity:

• Wash Regularly: Clean the vehicle every 1–2 weeks to remove dirt, bird droppings, and salt that can cause corrosion.
• Treat Paint Chips Immediately: Use touch-up paint to seal exposed metal and prevent rust from spreading.
• Wax the Paint: Apply automotive wax every 2–3 months to protect against UV rays and environmental contaminants.
• Inspect Seals and Trim: Replace cracked door seals or loose trim to prevent water ingress and wind noise.

Proton Electrical Spare Parts: Power and Connectivity

Key Specifications

Electrical components are essential for starting, charging, and powering onboard systems:

• Batteries: Typically rated between 50 to 75 Ah (Amp-hours), providing sufficient cranking power and reserve capacity for modern electronics.
• Alternators: Output ranges from 90A to 120A, ensuring consistent charging during operation.
• Starters: Designed to deliver high torque for quick engine ignition, even in hot conditions.

These components work together to maintain stable voltage and reliable electrical performance.

Maintenance Best Practices

To avoid electrical failures and starting issues:

• Keep Terminals Clean: Remove corrosion with a baking soda solution and apply dielectric grease to prevent future buildup.
• Avoid Short Trips: Frequent short drives prevent the alternator from fully recharging the battery. Combine errands or take longer routes when possible.
• Check Charging System: Use a multimeter to verify battery voltage (12.6V off, 13.8–14.4V running) to detect alternator issues early.
• Inspect Wiring: Look for frayed wires or loose connections, especially around the battery and fuse box.

Component Type	Critical Specification	Maintenance Frequency
Engine Gaskets	0.5–1.5 mm thickness; multilayer steel/composite	Inspect during oil changes; replace every 80,000–120,000 km or if leaking
Shock Absorbers	Damping force: 1000–2000 N/S	Inspect every 20,000 km; replace every 60,000–80,000 km
Brake Pads	Friction coefficient: 0.35–0.45	Inspect every 10,000 km; replace when thickness < 3mm
Battery	Capacity: 50–75 Ah	Check terminals monthly; replace every 3–5 years
Body Panels	Galvanized steel with anti-corrosion coating	Wash weekly; inspect for rust monthly

Important: Always use OEM or certified aftermarket spare parts when replacing components. Incorrect or low-quality parts can lead to poor performance, safety hazards, and voided warranties. Follow Proton’s official service manual for torque specifications, fluid types, and replacement procedures. Regular maintenance not only protects your investment but also ensures the safety of everyone on the road.

How to Choose Proton Spare Parts

Selecting the right spare parts for your Proton vehicle is essential for maintaining performance, safety, and long-term reliability. With a wide range of options available—from genuine OEM components to aftermarket alternatives—making an informed decision ensures your vehicle runs smoothly for years to come. Whether you're replacing worn components or upgrading your car, consider the following key factors when choosing Proton spare parts.

Genuine Proton Service Parts

Genuine parts are manufactured or authorized by Proton and distributed through official service centers. These components are engineered to meet the exact specifications of your vehicle, ensuring optimal fit, function, and integration with existing systems.

• Backed by Proton’s quality assurance and testing standards
• Designed specifically for Proton models like Saga, Persona, Iriz, Exora, X50, and X70
• Often come with traceable part numbers and batch certifications
• Help maintain factory warranty coverage when installed at authorized centers

Best for: Owners prioritizing reliability, warranty compliance, and seamless integration.

Compatibility & Model Matching

Proton has evolved its platforms over the years, especially with the introduction of models co-developed with Geely. It's crucial to match spare parts precisely to your vehicle’s model, engine type, and production year.

• Use your VIN (Vehicle Identification Number) or chassis number to verify part compatibility
• Differentiate between pre-facelift and post-facelift versions (e.g., Persona 2016 vs. 2019)
• Check engine codes (e.g., VVT, CamPro, or 3-cylinder turbo) before purchasing engine components
• Verify electronic compatibility for sensors, ECUs, and lighting modules

Pro tip: Consult online parts catalogs or use Proton’s official parts lookup tools for accuracy.

Quality and Durability

The longevity of a spare part depends on material quality, manufacturing process, and resistance to wear and corrosion. Higher-quality parts reduce the frequency of replacements and prevent secondary damage.

• Genuine Proton parts use high-grade alloys, rubber compounds, and coatings
• Look for ISO-certified manufacturers in the aftermarket segment
• Brake pads should have consistent friction ratings; avoid overly cheap organic compounds
• Suspension components should feature proper heat treatment and anti-rust finishes

Technical note: Poor-quality bushings or ball joints can lead to misalignment and uneven tire wear.

Warranty and Support

A solid warranty reflects the manufacturer’s confidence in their product. Always check warranty terms before purchase.

• Genuine Proton parts typically offer 1–2 year warranties
• Reputable aftermarket brands may offer comparable or longer coverage
• Warranty should cover both part failure and installation-related issues (if applicable)
• Keep proof of purchase and installation records for claims

Smart move: Choose parts with transferable warranties if you plan to resell the vehicle.

Price vs. Value Consideration

While genuine Proton parts may cost more upfront, they often provide better long-term value through durability and performance.

• Economy alternatives may save money initially but could require earlier replacement
• Premium aftermarket brands (e.g., Bosch, Denso, TRW) offer reliable non-OEM options
• Complete kits (e.g., clutch kits, brake pad & rotor sets) often offer better value than individual parts
• Compare total cost of ownership, not just sticker price

Key insight: A 20% higher initial cost can result in 50% longer service life.

Professional Advice and Installation

Even the best parts can underperform if improperly installed. Expert guidance ensures you choose and install the right components.

• Consult certified mechanics familiar with Proton vehicles
• Ask for diagnostic checks before replacing parts (e.g., confirm brake rotor warping before replacement)
• Ensure proper torque specs and alignment during installation
• Use recommended lubricants and hardware (e.g., anti-seize on caliper bolts)

Expert tip: Avoid mixing OEM and low-grade aftermarket parts in the same system (e.g., front OEM brakes, rear cheap pads).

Professional Recommendation: For daily drivers and family vehicles, prioritize genuine Proton parts or high-tier aftermarket equivalents from trusted brands. For older models where OEM parts are scarce, consider reputable cross-compatible alternatives with verified fitment. Always balance cost with safety-critical functions—never compromise on braking, steering, or engine components.

Part Category	Recommended Type	Expected Lifespan	Notes
Engine Components (Sensors, Gaskets)	Genuine Proton or OEM-equivalent	80,000–150,000 km	Ensure ECU compatibility
Brake Pads & Rotors	Premium Semi-Metallic or Ceramic	30,000–50,000 km	Look for noise-dampening shims
Suspension (Shock Absorbers, Bushings)	Genuine or High-Grade Aftermarket	60,000–100,000 km	Check for dust boots and seals
Lighting (Headlights, Bulbs)	OEM or LED Upgrade (DOT/ECE Certified)	2–5 years	Avoid non-compliant cheap LEDs
Filters (Air, Oil, Cabin)	Genuine or Reputable Brand	10,000–20,000 km	Prevents engine and HVAC damage

Additional Considerations

• Availability: Some newer Proton models (e.g., X50) have strong OEM support, while older Saga variants may require aftermarket sourcing
• Recalls & Updates: Check if Proton has issued technical service bulletins (TSBs) for your model that recommend updated parts
• Environmental Resistance: In tropical climates like Malaysia, choose parts with anti-corrosion coatings and UV-resistant plastics
• Brand Reputation: Stick to known suppliers and avoid counterfeit parts that mimic Proton packaging
• Installation Tools: Some modern Proton vehicles require specialized tools (e.g., TPMS reset, turbo oil lines) – factor this into your service plan

Comprehensive DIY Guide to Replacing Proton Spare Parts

Replacing spare parts on your Proton vehicle can seem daunting, but with proper preparation, tools, and knowledge, many common repairs can be completed safely and efficiently at home. This detailed guide walks you through the essential steps for replacing key Proton components, including engine, electrical, suspension, and body parts. Whether you're maintaining a Proton Saga, Persona, X50, or Prevé, understanding the correct procedures helps ensure reliable performance and extends your vehicle's lifespan.

Safety Warning: Always disconnect the battery before working on electrical systems. Use proper jack stands when lifting the vehicle—never rely solely on a hydraulic jack. Wear safety goggles and gloves to protect against sharp edges, hot surfaces, and chemical exposure. Work in a well-ventilated area, especially when handling fuel or exhaust components.

Essential Tools and Preparation

Before beginning any replacement job, gather the necessary tools and prepare your workspace:

• Socket wrench set with metric sizes (8mm–19mm commonly used on Proton models)
• Breaker bar for stubborn bolts
• Jack and jack stands rated for your vehicle’s weight
• Wheel chocks and safety cones
• Flathead and Phillips screwdrivers
• Needle-nose pliers and wire cutters
• Torque wrench (for precise bolt tightening)
• Digital multimeter (for electrical diagnostics)
• Shop rags, brake cleaner, and anti-seize lubricant
• Your Proton owner’s manual or service manual (e.g., Proton Workshop Manual)

Step-by-Step Replacement Procedures by System

1. Proton Engine Parts Replacement

Common engine components like alternators, water pumps, or spark plugs often require replacement due to wear or failure. Follow these general steps:

1. Park on a level surface and allow the engine to cool completely
2. Disconnect the negative battery terminal to prevent electrical shorts
3. Locate the faulty component using the engine bay diagram in your manual
4. Remove any covers, hoses, or wiring harnesses obstructing access
5. Use a socket wrench to loosen and remove mounting bolts
6. Carefully extract the old part, noting orientation and connections
7. Install the new OEM or compatible Proton-certified part
8. Reattach all bolts and reconnect hoses/wiring
9. Tighten fasteners to manufacturer-specified torque values
10. Reconnect the battery and start the engine to verify proper operation

Pro Tip: Label or photograph wiring connections before disconnecting them to ensure correct reassembly. Apply dielectric grease to electrical connectors to prevent corrosion.

2. Proton Electrical Parts Replacement

Includes components such as headlights, sensors, fuses, relays, and infotainment units.

1. Always disconnect the battery’s negative terminal first
2. Identify the faulty component using diagnostic trouble codes (if applicable) or visual inspection
3. Access the part by removing trim panels, grilles, or dash components as needed
4. Unplug the electrical connector by pressing the release tab
5. Remove mounting screws or clips securing the component
6. Install the new part, ensuring it is compatible with your Proton model year
7. Secure with fasteners and reconnect the wiring harness
8. Reconnect the battery and test the component’s functionality

Caution: Never bypass fuses or use higher-rated fuses than specified. This can lead to electrical fires or damage to sensitive modules like the ECU or BCM.

3. Proton Suspension Parts Replacement

Worn suspension components such as shock absorbers, control arms, or ball joints affect ride quality and safety.

1. Loosen lug nuts slightly while the car is on the ground
2. Lift the vehicle using a floor jack at the manufacturer-recommended lift points
3. Secure the vehicle on jack stands under reinforced frame sections
4. Remove the wheel to access suspension components
5. Inspect bushings, joints, and struts for wear, cracks, or leaks
6. Use a wrench or socket set to remove mounting bolts
7. Replace the worn part with a high-quality OEM or aftermarket equivalent
8. Reassemble in reverse order, tightening bolts to torque specifications
9. Reinstall the wheel and lower the vehicle
10. Retighten lug nuts to specification after the vehicle is on the ground
11. Schedule a wheel alignment afterward to prevent uneven tire wear

4. Proton Body Parts Replacement

Includes bumpers, fenders, mirrors, and trim panels that may be damaged in accidents or degrade over time.

1. Remove any screws, clips, or fasteners securing the body panel
2. Use a plastic trim removal tool to avoid scratching paint
3. Disconnect any wiring (e.g., for side mirrors or fog lights)
4. Carefully detach the old part from mounting points
5. Position the new part and align it with existing holes and brackets
6. Reconnect wiring and reattach fasteners securely
7. Test moving parts (like mirrors) for full functionality
8. Ensure proper gaps and flush fitment with adjacent panels

Component Type	Common Signs of Wear/Failure	Recommended Replacement Interval	Special Considerations
Engine Parts	Check engine light, overheating, unusual noises	As needed; follow maintenance schedule	Use OEM gaskets and torque specs to prevent leaks
Electrical Components	Intermittent operation, blown fuses, warning lights	As needed; inspect during routine maintenance	Ensure compatibility with Proton’s CAN bus system
Suspension Parts	Clunking noises, uneven tire wear, poor handling	60,000–100,000 km (varies by driving conditions)	Always replace in pairs; perform alignment post-replacement
Body Panels	Cracks, dents, fading, misalignment	As needed due to damage or aging	Paint matching may be required for visible areas

Expert Tip: Keep a log of all parts replaced, including part numbers, purchase sources, and installation dates. This helps track maintenance history and supports warranty claims if needed.

Final Checks and Recommendations

• Double-check all fasteners are tightened to the correct torque
• Test all replaced components under real-world conditions (e.g., drive slowly at first)
• Listen for unusual noises or vibrations after reassembly
• Dispose of old parts responsibly—recycle batteries, oil, and metals
• Refer to Proton’s official service bulletins for known issues or recalls
• Consider using Proton Genuine Parts for optimal fit and reliability

While many Proton spare part replacements can be done at home, complex tasks involving the transmission, airbags, or advanced driver-assistance systems (ADAS) should be handled by certified technicians. Always consult your vehicle’s service manual and prioritize safety over speed. Regular maintenance not only improves performance but also enhances fuel efficiency and resale value. When in doubt, seek professional assistance to ensure your Proton remains safe and reliable on the road.

Frequently Asked Questions About Proton Spare Parts

Q1: Are Proton spare parts long-lasting and durable?

Yes, Proton spare parts are engineered for durability and long-term performance. Manufactured using high-grade materials and advanced production techniques, these components are built to withstand the rigors of daily driving, including extreme weather conditions, rough terrain, and heavy usage.

Each part undergoes rigorous quality control and performance testing to ensure reliability and resistance to wear and tear. However, to maximize lifespan, it's essential to follow proper installation procedures and adhere to a regular maintenance schedule. Routine inspections, timely servicing, and correct usage significantly enhance the longevity of Proton spare parts, helping you get the most value from your investment.

Q2: Are Proton spare parts compatible with all vehicle makes and models?

No, Proton spare parts are specifically designed and calibrated for Proton vehicles only. They are manufactured to meet the exact engineering specifications, dimensions, and performance standards of Proton models, ensuring optimal fit, function, and safety.

Using Proton parts on non-Proton vehicles—or vice versa—can lead to compatibility issues, improper fitment, reduced performance, and even potential damage to critical vehicle systems. For best results and to maintain warranty coverage, always use OEM (Original Equipment Manufacturer) parts that match your vehicle’s brand and model.

If you're replacing parts on a non-Proton vehicle, it's recommended to source components from the respective manufacturer or verified aftermarket brands that guarantee compatibility.

Q3: Are Proton spare parts affordable compared to other brands?

Yes, Proton spare parts are generally considered affordable and offer excellent value for money. While pricing may vary depending on the specific component (e.g., engine parts, suspension systems, or electrical modules) and the vehicle model, Proton parts are competitively priced when compared to other automotive brands in the same segment.

Their cost-effectiveness is further enhanced by their durability and reliability, reducing the need for frequent replacements and minimizing long-term ownership costs. To ensure both affordability and authenticity, it is strongly advised to purchase Proton spare parts from authorized dealers or certified service centers. This not only guarantees genuine products but also provides access to promotions, warranties, and expert support.

Q4: Do Proton spare parts come with a warranty?

Yes, Proton spare parts typically come with a manufacturer-backed warranty. This warranty covers defects in materials and workmanship under normal operating conditions and proper maintenance.

The standard warranty period varies by part type but generally ranges from 6 months to 1 year. Some high-performance or critical components may have extended coverage. However, the warranty is subject to specific terms and conditions, including:

• Proper installation by a certified technician or authorized service center.
• Regular vehicle maintenance as per Proton’s recommended schedule.
• No modifications, misuse, or damage caused by accidents or improper handling.
• Use of genuine Proton parts and fluids during servicing.

To claim warranty benefits, retain your purchase receipt and service records. Always consult your local Proton dealer for detailed warranty information relevant to your specific part and region.