All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(1877 products available)
Ready to Ship
An 1.5k ohm resistor is a passive electrical component that resists current flow. It is used to control the flow of current in electrical circuits. The 1.5 k resistors have different types based on various factors like materials, shapes, and applications. They include;
Carbon Composition Resistors
These are the traditional carbon resistors. They are made with a carbon-based composite material. This material is used as a resistive element. These resistors are used in applications where pulse handling is important.
Metal Film Resistors
They are made with a thin layer of metal. This layer acts as a resistive element. These resistors have a wide range of resistance values. They are also used in applications that require precision.
Carbon Film Resistors
These resistors are made with a carbon film deposited on a ceramic substrate. They are widely used in consumer electronics.
Wirewound Resistors
These are the 1.5k ohm power resistors that are often used in high-power applications. They are made with a metal wire that is wound into a coil. They are used in applications that require high levels of resistance.
Metal Oxide Resistors
They are made with metal oxides. This makes them suitable for high-temperature applications. They are often used in industrial settings.
Thin Film Resistors
These are the 1.5k surface mount resistors that have a resistive value that is printed on a ceramic or glass substrate. They are commonly used in high-frequency applications.
Thick Film Resistors
These are the 1.5k SMD resistors that have a resistive value that is deposited onto a substrate using a thick film process. They are used in applications that require miniaturization.
Pulse Resistors
These are the 1.5k ohm pulsed resistors that are designed to withstand high pulse loads. They are used in applications like laser systems and pulsed power systems.
Power Resistors
These are the 1.5k high-value resistors that are designed to handle high power levels. They are used in applications such as motor control and power electronics.
Most 1.5 k ohm resistors have standard specifications that make them useful for various applications. They have a voltage rating of 50 volts and power rating of 1 watt. The maximum working voltage for these resistors is 50 ohms, but the users should note that the voltage can cause stress on the circuit. They have a temperature coefficient of 100 ppm per degree Celsius.
1.5 k ohm resistors have tolerances that range from 0.1 to 20 percent, although the standard is 5 percent. The tolerance level determines how accurate the resistor is. For those with low tolerances, the accuracy is high, meaning that the resistance value remains constant. On the other hand, high tolerance values have significant variations in the resistance value. The resistor's construction determines the 1.5 k ohm resistor tolerance.
It is essential to maintain the 1.5 k ohm resistor so that it can function well and for a long time. Here is how to do it:
The choice of a 1.5k ohm resistor depends on several factors, including the type of circuit, its configuration, and the overall purpose of the resistor. Here are some factors that must be considered before choosing a 1.5k ohm resistor:
Power rating:
In choosing a 1.5k ohm resistor, the power rating should be considered. The power rating of the resistor must be compatible with the circuit.
Tolerance:
This is the percentage of variation from the nominal value. The tolerance level of the 1.5k ohm resistor must meet the requirement of the circuit.
Temperature coefficient:
The temperature coefficient of a 1.5k ohm resistor indicates how its resistance changes with temperature. This can affect the performance of a circuit, so it must be considered.
Voltage rating:
The voltage rating of the resistor must be greater than the maximum voltage that will be applied across it in the circuit.
Noise:
The 1.5k ohm resistor's noise must be considered if it is used in a sensitive circuit like an audio amplifier.
The process of replacing a 1.5k ohm resistor is quite straightforward. First, gather all the necessary tools and materials for the task. These include a soldering iron, solder, desoldering pump or solder wick, multimeter, new 1.5k ohm resistor, and wire cutters. With everything in place, follow the steps below:
Power off the device
Powering off the device is the first step before replacing a resistor. This is because, when the device is still on, it may lead to short circuits, damage to other components, and even electric shocks. So, before doing anything, ensure the device is powered off.
Disassemble the device
After ensuring the device is powered off, go ahead and open it up carefully to access the circuit board. While doing this, take note of how the parts are connected so that it will be easier to reconnect them.
Identify the old resistor
Now, use the circuit schematics or visual inspection to locate the old 1.5k ohm resistor that needs to be replaced.
Desolder the old resistor
Use a soldering iron to melt the solder joints holding the resistor in place. Then, use a desoldering pump or solder wick to remove the molten solder from the pins of the resistor. After this, carefully take out the old resistor from the circuit board.
Test the new resistor
Before installing a new 1.5k ohm resistor, it is very important to test it first to ensure it is working perfectly. Use a multimeter to measure the resistance value and confirm that it is close to 1.5k ohms.
Insert the new resistor
Put the new 1.5k ohm resistor into the circuit board, ensuring that it is properly aligned with the pads and the correct orientation.
Solder the new resistor
Use a soldering iron to melt the solder and join the pins of the new resistor to the circuit board. Ensure that the solder joints are clean and secure to avoid any connection issues.
Reassemble the device
After completing the soldering, carefully put the device back together, following the disassembly steps in the reverse order.
Power on the device
Once the device is reassembled, turn it on to ensure that it is functioning properly. If everything works well, the task is successfully completed.
Q1: What is an 1.5k ohm resistor used for?
A1: The 1.5k ohm resistor, also known as the 1500 ohm resistor or 1.5 kohm resistor, is a commonly used electrical component that impedes the flow of electric current in a circuit by 1.5 thousand ohms. It is often used to limit current and voltage in a circuit, as in LED lights where it limits the current flowing through the diode to avoid damage.
Q2: What is the meaning of 1.5k in a 1.5k ohm resistor?
A2: The term ""1.5k ohm"" in a resistor means that the resistance value is 1,500 ohms. The ""k"" stands for ""kilo,"" which is a prefix meaning one thousand. Therefore, 1.5k ohm is equal to 1,500 ohms of resistance.
Q3: What does a 1.5k ohm resistor look like?
A3: A 1.5-k-ohm resistor looks like any other resistor. It has color bands that indicate its resistance value and is a small cylindrical component. The physical appearance may vary slightly depending on the size and type, but generally, it looks like a small rectangular block with metal bands.
Q4: Can I use a 1.5k ohm resistor in place of a 1.5 kohm resistor?
A4: Yes, it is possible to use a 1.5k ohm in place of a 1.5 kohm resistor. There is no difference between the two; they are simply different ways of writing the same value.
