All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(39091 products available)
Ready to Ship
Ready to Ship
Ready to Ship
There are several types of circuit pir sensors, each designed for specific applications and requirements. Business owners or bulk buyers should know about the following when purchasing this product:
These sensors are installed on walls and ceilings and offer a broad coverage range. They suit most indoor applications, such as offices, retail stores, and warehouses. Many modern versions include adjustable sensitivity and range settings, giving fine control over detection.
Lens-based PIR sensors use specialized lenses to amplify the infrared signals they detect. They are meant to improve motion detection accuracy. These sensors often use Fresnel lenses, which help expand the coverage area without increasing the size of the device. This feature makes them practical in many surveillance and alarm applications.
Unlike indoor versions, outdoor PIR sensors are designed to withstand environmental exposure, such as rain, wind, and extreme temperatures. Their sealing and housing are weather-proof to ensure reliability. These sensors have also enhanced features that filter out pets and non-human heat sources to minimize false alarms.
These sensors combine passive infrared with another technology, such as microwave detection, to confirm motion. They provide more reliable detection than single-technology sensors, especially in challenging environments. Dual-tech sensors are commonly found in commercial security systems, where accurate detection is crucial.
These sensors are most favored for their ease of installation, especially in locations where wiring is not practical or cost-effective. Most have battery power, though some may offer solar options. These sensors communicate via radio frequency with central alarm systems, providing flexibility in setup.
These sensors adjust their sensitivity based on ambient temperature changes. They are designed to maintain consistent performance across different environments. This feature is especially useful in areas with significant seasonal temperature variations, ensuring the sensors remain accurate year-round.
Traders and bulk buyers need to pay attention to the following specifications and features:
Detection Range
The typical detection range for most PIR sensors is 8 to 12 meters. However, specific models can extend this distance to up to 30 meters for larger areas. Ensure that the selected sensor has the appropriate range for the intended application, whether indoor or outdoor.
Beam Angle
The beam angle usually ranges from 90 to 180 degrees. Wider angles offer larger coverage, ideal for spacious rooms or outdoor areas. Conversely, narrower angles provide focused detection in hallway settings. Select the angle based on the environment where the sensor will be placed.
Response Time
Most PIR sensors are made to have a response time between 0.3 and 1 second. Quick response times ensure that any motion in the sensor's range is detected instantly. This feature is necessary for security applications where timely alerts can prevent potential intrusions.
Power Supply
Many modern PIR sensors are created wirelessly and are powered by batteries. Some sensors are designed to have extended battery life, frequently lasting over five years. There are also wired models, particularly those designed for commercial use, which connect directly to power sources.
Operating Temperature
PIR sensors are generally operable within a temperature range of -10°C to 50°C. This flexibility ensures that the sensor functions in various climates. Some outdoor models can withstand even broader temperature ranges for extreme weather conditions.
Choose the Right Location
Identify suitable spots to install the sensors, considering where motion should be detected. For indoor applications, position the sensor in room corners to maximize coverage. Mount outdoor sensors in sheltered areas to protect them from direct weather while ensuring a broad field of view.
Mount the Sensor
For wall-mounted or ceiling-mounted indoor sensors, use screws or brackets for secure installation. Outdoor models should be housed in weatherproof enclosures if not designed to be weather-resistant. Ensure that the sensors are installed at the recommended height, usually between 2 and 2.5 meters.
Connect to Power (if Wired)
For wired PIR sensors, connect the devices directly to the power supply, ensuring proper electrical connections. Most wired sensors are connected to central alarm or security systems. Follow the manufacturer's guidance for precise wiring to avoid system malfunctions.
Pair Wireless PET Sensors With Alarm Systems
Wireless PIR sensors need pairing with a central alarm system or monitoring panel. This pairing process is usually done by pressing a button on both the sensor and the central system unit. Ensure the wireless signal strength is adequate in the sensor's location for uninterrupted communication.
Test Sensor Functionality
After installation, test each sensor to ensure proper motion detection. Walk through the sensor's range to see if it triggers the alarm or sends a notification to the connected system. Adjust settings like sensitivity and range to fine-tune the device for optimal performance.
Regular Cleaning
Dust and debris can accumulate on the surface of the PIR sensors, which can impact their functionality. Use a gentle, damp cloth to clean the sensor casing periodically. Avoid harsh chemicals that can damage the sensor's components. For outdoor models, check more frequently due to environmental exposure.
Testing
Conduct regular tests to ensure that each sensor is functioning optimally. This can mean walking through its detection field to see if it triggers an alert. Testing should be done after major weather changes or power outages, which can affect sensor performance.
Battery Checks and Replacement
If using battery-powered PIR sensors, regularly check battery levels to ensure constant operation. Some sensors will signal low battery, while others should be checked manually. Replace batteries yearly or as per the manufacturer's instructions to avoid sensor downtime.
Firmware Updates
Many modern wireless PIR sensors include mobile app connectivity for software updates. Updates often contain performance enhancements or security patches. Regularly check for updates and install them following the manufacturer's guidelines to ensure optimal operation.
Environmental Monitoring
Monitor the area surrounding the PIR sensors for changes that might affect their performance. For outdoor sensors, overgrown foliage or newly installed structures can block their detection range. Regularly adjust positioning or cleaning if these obstructions occur.
Cost-Effective Security Solutions
A passive infrared sensor detects body heat emitted by living beings. It is generally less expensive than active infrared sensors and long-range microwave sensors. People can enjoy more installation costs with added monitoring capabilities.
Energy Efficiency
Many modern PIR sensors are created with energy efficiency in mind. They automatically turn lighting and HVAC systems on or off, which helps reduce power consumption. The constant adjustment of these systems based on occupancy ensures that energy is not wasted in unoccupied spaces.
Automatic Operation
These sensors always provide hands-free operation. They automatically activate systems like lighting and alarms without needing human intervention. This automation is especially helpful in areas where people frequently enter and exit, such as lobbies or conference rooms.
Increased Security and Safety
With the help of these sensors, businesses can always have peace of mind knowing that they are alerted when there is movement in their premises. This capability serves not just as theft prevention but as a safety measure against potential hazards or intruders in restricted areas.
Reduced False Alarms
The dual-technology PIR sensor combines passive infrared and microwave detection. It helps reduce false alarms caused by pets, moving objects, or environmental factors. This feature provides accurate movement detection while distinguishing between real threats and benign activities.
Simplicity
PIR sensors are simple to install and use, requiring no complex setup or programming. Most models are mounted in a matter of minutes and are immediately ready for operation. Their straightforward design makes them accessible for various applications without specialized knowledge for installation.
Choosing Recognized Brands
Selecting circuit PIR sensors from brands of known reputation ensures that quality standards are met in manufacturing. They will have sensors tested for durability, accuracy, and reliability. These brands will also have certified products by industry standards, which ensures safety and performance in varied environmental conditions.
Check for Certifications
Look for sensors that have relevant certifications, such as CE, UL, or RoHS. These certifications signal compliance with safety regulations in their respective markets. For instance, UL certification on the sensors means they have been tested for electrical safety in the U.S. market.
Durability Testing
PIR sensors intended for outdoor use should be subjected to durability tests. They should also be tested for heat, rain, snow, and strong winds to ensure they will perform optimally in all kinds of weather. Always go for those that have heat-resistant casings and strong internals.
Data Protection Features
With an increase in interconnected security systems, buyers should ensure the sensors they choose include good data privacy and protection. Look for options with encrypted transmission standards to protect sensor data from unauthorized access. Choose those with firmware updates to address possible vulnerabilities promptly.
Regular Maintenance Guidelines
The manufacturer should provide clear, concise care and maintenance procedures for the circuit pir sensors. Maintenance ensures optimal performance throughout the sensor's lifecycle and helps prevent malfunction and safety risks. Sensors that have low upkeep requirements will promote higher user satisfaction and lower total costs.
A1: The outdoor PIR sensor is designed specifically for outdoor use. It is sealed in weatherproof enclosures, giving it durability against the elements. It also has advanced technology to differentiate between human motion and non-living heat sources to minimize false alarms effectively.
A2: Cleaning should happen at least every 3 to 6 months, particularly for outdoor models exposed to dust, pollen, and other debris. These particles could obstruct the sensor over time and hinder its ability to detect motion. Use a soft cloth for cleaning, and avoid harsh chemicals that may damage the sensor.
A3: Yes, there are dual-technology PIR sensors that work well in large spaces. The warehouse's height can hinder traditional passive sensors, which is why using a dual-tech sensor that can complement the limitation of traditional sensors is necessary. The sensors use microwave detection to cover larger areas.
A4: Yes. While wireless PIR sensors generally need low upkeep, they still require some attention. The batteries in wireless models have to be checked and replaced often to ensure they operate properly. Additionally, if some dust or debris accumulates on the sensor itself, it needs cleaning to maintain proper functionality.
A5: The wired sensors are connected directly to a power source, so a total outage will cause them to lose functionality. However, this issue can be resolved by connecting them to an uninterruptible power supply (UPS), which provides backup power during outages and ensures sensors remain operational.
