All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(8640 products available)
Danfoss original mechanized parts come in several types. They include:
Danfoss original solenoid valves
Danfoss solenoid valves work well by using a coil to control the valve's operation. This allows the valve to change from open to closed when the electrical current is on or off. The valve is used to control the fluid movement in a system by either allowing or stopping, and this is achieved by changing the valve's position. Danfoss makes a wide range of solenoid valves that can work well with diverse refrigerants and in different temperature and pressure environments.
Danfoss thermal expansion valves
The thermal expansion valve (TXV) controls the flow of refrigerant into the evaporator. This causes the refrigerant to expand and drop in temperature, absorbing heat in the process. Danfoss thermal expansion valves with liquid and vapor diaphragms are used in the HVAC and refrigeration industries to keep the system working well and prevent damage from over or under exposure.
Danfoss original pressure controls
Danfoss's basic pressure control consists of a mechanical switch that reacts to pressure change. The pressure control can work in both air and fluid systems, and it enables the system pressure to either increase or decrease, depending on the desired pressure range settings. Different valve series have different functions, including but not limited to maintaining, switching, and reducing pressure.
Danfoss compressor clutch
Danfoss compressor clutches engage and disengage the compressor with a clutch system. It is similar to a car's AC system, where the compressor circulates refrigerant throughout the system. Danfoss induction and AC/DC clutches can withstand different conditions while performing efficiently.
Danfoss fittings
Danfoss' original fittings include valves, caps, and compressors. Danfoss fittings play the role of connecting parts of the system together, which enable the refrigerant to circulate. For instance, valves are used for the control and measurement of the system. Caps serve as the seal and protection to the refrigerant system elements.
Danfoss's products are used in the following industries:
Refrigeration and HVAC
Danfoss solenoid valves, thermal expansion valves, pressure controls, and compressor clutches are all used to keep the refrigerant in the right amount and where it needs to go in refrigerant systems. Valves and controls help keep the right temperature and pressure by controlling the flow. The thermal expansion valve works by releasing excess refrigerant from the condenser to the evaporator to prevent system problems caused by too much pressure.
Hydraulics systems
In Danfoss hydraulic systems, the solenoid valve is used to control the fluid movement, while pressure control helps keep the pressure range in the hydraulic system. This helps keep the system's efficiency and stability, as well as help with the ability of hydraulic machines to do work.
Manufacturing machinery
Solenoid valves, thermal expansion valves, and pressure control are commonly applied in manufacturing machinery. For instance, they are used in cooling systems to help maintain machinery's temperature. Keeping machinery at the right temperature helps reduce wear and tear, thus increasing the system's productivity.
Mobile equipment
On mobile equipment, Danfoss's components are integrated into the air conditioning system to help keep the right temperature within the system. The compressor clutch engages and disengages, which helps keep the system in the right use and thus improve energy efficiency.
Building automation systems
Danfoss components such as valves and pressure control are embedded in building automation systems to help maintain HVAC systems. This helps improve energy efficiency by maintaining the right temperature within the building.
Danfoss's original parts have the following specs and features:
Valves
Danfoss valves are made of high-grade brass, stainless steel, and NBR rubber. They come in several ranges and sizes. For instance, the O ring and blue point copper valves range between 6-64 mm, while the thermostatic expansion valve range is between 3/8- 7/8”. The maximum tolerance temperature for the copper valves is + 120 °C, while that of the expansion valve is - + 65 °C.
Danfoss valves' maximum pressure is set at 45 bar, and they can be delivered with a solder connection or a flare. The valve's core is sent all set with the right refrigerant.
Electronic expansion valves
Danfoss eExpn electronic expansion valves cover a range of core tube sizes from 3 to 5 mm. The valves are actuated and communicated via a dedicated app. The valves work with an array of refrigerants, including R1234ze, R410A, and R32. They are compatible with several OEM controllers.
The valves are available in several connector geometries and sizes for tube diameters of 6-12 mm. The maximum tolerance temperatures are +65 °C, while the maximum system pressure is 50 bar. Valves can be delivered with solder or flare connections.
Danfoss original solenoid valves
The Danfoss solenoid valves are made of brass and stainless steel. They come in various orifice sizes, with the smallest being 1.0 mm and the biggest 6.5 mm. The valve's maximum media temperature tolerance is + 85 °C. The valve's maximum pressure is set at 40 bar. Electrical inputs range from 12 VDC to 230 VAC. The coil can either be manual or automatic reset. The valves can either be solder or mounting connected.
Distributors
Danfoss distributors are composed of brass and stainless steel. The primary tube sizes are 3 mm and 4 mm. Media temperature tolerance is + 65 °C. The maximum pressure can be 45 bar. The distributors have different connections and tube sizes of 6-12 mm. They also have OEMs compatible with various sensors.
Danfoss original pressure controls
Danfoss pressure controls have a brass housing. The adjustable pressure range is about 5-25 bar. They can work with a variety of different fluids, including water and refrigerant. The standard electrical connectors are 6 mm. The max loads can go up to 250 VAC.
Danfoss original selector valves
Danfoss' manual and automatic selector valves are composed of brass and stainless steel. The primary tube sizes are 6 mm and 8 mm, while the maximum media temperature tolerance is + 85 °C. The maximum pressure can reach 40 bar. Mount and solder connection options are available.
Danfoss' shunt valves feature a brass and stainless steel construction. The main tube sizes are 6 and 8 mm. The max media temperature tolerance is +85 °C. The maximum pressure is set at 40 bar. Mount and solder connections are both available.
Here are some factors business owners should consider to attract potential wholesale buyers to Danfoss products:
Offer compressor clutches in various tolerances
Buyers can be offered Danfoss compressor clutches with different tolerance ranges. For instance, the DC clutches have a tolerance range of - 35 °C to + 55 °C, and the AC clutches can reach up to + 85 °C. Buyers may also want clutch parts that can be solder and mounting connected.
Stock a variety of solenoid valves
Buyers should consider getting solenoid valves in various orifice sizes to control different fluid flow rates. For instance, the RVP VALVE series orifice size can range from 1.0 mm to 6.5 mm. The valves should also have different electrical ratings, coil types, and voltage ratings.
Get thermal expansion valves in various sizes
Buyers should look for manual expansion valves in different tube sizes. For instance, the Thermostatic expansion valve ranges are between 3/8- 7/8”, while the Electronic expansion valves cover a range of core tube sizes from 3 to 5 mm. Buyers should also settle for industrial-quality materials like brass, stainless steel, and NBR rubber.
Select pressure control valves with various customizations
Pressure control valves that business owners should get have different adjustable pressure ranges. For instance, some are between 5-25 bar. Offer controls with a variety of fluids like refrigerants and water. The valves should come with end users' customizable electrical loads, including 6 mm max loads.
Stock selector and shunt valves
To enhance the system's efficiency, business owners should get manifold valve assemblies that allow simultaneous connection and monitoring of two or more systems. The valve's functions and capabilities should vary by selecting or automatically. Also, offer shunt valves that can circulate heating or cooling fluids through a system.
Yes. When appropriately maintained, Danfoss products have a long lifespan. Buyers should be provided with products like Danfoss hydraulic pumps and valves that can last over 2,000 hours of use. The wear parts should be replaced, and the pumps and clutches should be serviced regularly to ensure optimal performance.
Generally, the delivery time depends on the product. Some may be manufactured on order basis, while others are readily available. Confirming with the supplier about the specific products is important, as it determines the duration. Additionally, the delivery location plays a part in the time taken. For instance, international deliveries take longer than local ones.
Yes. When constructed with quality material, like stainless steel, brass, and NBR rubber, Danfoss parts can handle high stress, heat, and pressure. They include compressor clutches, solenoid valves, and thermal expansion valves. The usage of these durable materials ensures wear and tear is minimized, hence giving the products a longer functional period.
When in need of replacement parts, customers should get only genuine Danfoss original parts from trusted sources. They should also inspect their tools regularly to identify wear parts that need to be changed. Moderate working conditions satisfaction and proper refrigeration and HVAC systems care are also recommended to improve the products' lifespan.
Danfoss products are OEM (original equipment manufacturer) products meant to offer the same performance level as the original manufactured products. Aftermarket parts are the parts manufactured by other manufacturers, and they resemblance the original manufactured parts. They are distinct products, each with the advantages and disadvantages of its own.
