All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(1073 products available)
2025-07-31
The IR2106S is a versatile choice for many uses because it comes in different types. Some of the popular types of IR2106S include the following:
Industrial Chip
The IR2106S industrial chip is ideal for many heavy-duty applications. The chip has metal pins for soldering to a circuit board, providing a robust design that ensures durability. Its operational voltage of 500V makes it fit for industrial settings where high power is needed. Also, the charge pump and bootstrap provide flexibility in the IC's power supply options.
Automotive IR2106S Chip
The IR2106S automotive chip is used in the automobile industry. The chip is designed to withstand extreme temperatures and harsh environmental conditions. However, it still works seamlessly within engine control systems, power steering, and braking systems.
Consumer IR2106S Chip
The IR2106S consumer chip is found in a lot of consumer electronic products. These include motor control for fans, pumps, and home appliances. The chip is cost-effective and easy to integrate. Thus, it is a good choice for designers of consumer electronics. Moreover, this particular version of the chip is often requested in high volumes, making it ideal for large-scale production runs.
Military IR2106S Chip
The IR2106S is called the QIPT version in the military context. It is often used in weapon systems, radar, satellite communication, and other electronics. The QIPT version of the IR2106S chip is ideal for military applications because it can endure extreme conditions and build records of reliability in critical operations.
Commercial IR2106S Chip
This is the most widely used IR2106S chip. Almost all industries use it. They use it because it has an integrated high- and low-side driver for power MOSFETs and IGBTs. The chip is used in various applications. Some of them include renewable energy systems, and power electronics in electric vehicles. Moreover, it finds extensive applications in robotics and automation for motor control. People like the IR2106S chip for its versatility and ability to endure high voltage and current.
Selecting the right IR2106S chip, particularly in bulk, requires one to consider key factors. These factors include the following:
Application Requirements
Different applications need different things. For instance, an industrial setting may need an IR2170S chip that can handle high power. On the other hand, a consumer application may need a more budget-friendly option like the IR2106S automotive chip. Therefore, it's important to analyze the specific needs of the application first before going for a particular chip.
Batch Size and Budget
The batch size and budget are some of the important considerations when choosing the IR2106S chip. Buying in bulk usually comes with a discount. However, this discount usually depends on the vendor. Also, the chip's price can change depending on the batch size. The larger the batch, the higher the price. The smaller the batch, the lower the price. However, since the IR2106S chip is likely to be requested by many people, the unit price becomes lower at large scales. Buyers should get quotes for different batch sizes to see the most party-friendly option.
Supplier Reputation and Lead Time
Researching the supplier's reputation is vital. This is especially true when considering lead times and stock availability. Buyers should pursue trusted vendors who have a reputation for providing quality products consistently. Also, they should ensure that the suppliers can deliver the chips within a reasonable time frame. Moreover, it's good for buyers to consider stock availability. The last thing a buyer wants is delays caused by stock issues.
Quality and Compatibility
Make sure to prioritize quality. This is because quality directly affects the product's performance when using the chip. Also, it is vital to ensure that the IR2106S chip is compatible with the existing systems within the buyer's industry. This reduces the need for additional adjustments or replacements.
The IR2106S chip is relatively straightforward. It works best with applications that require high and low-side drive for power MOSFETs and IGBTs. Below are key things to consider when using this chip:
Power Supply Arrangement
The IR2106S requires a dual power supply. These are the high-side and low-side power supplies. The high-side power supply needs to be in the range of 10 to 20 volts. Meanwhile, the low-side power supply should be around 10 to 20 volts, too. However, it should be slightly more than the negative bias (V-). The negative bias is the low-side output driver common terminal.
Bootstrap Capacitor Configuration
Install a bootstrap capacitor between the chip's bootstrap pin and the high-side output. Ensure the capacitor is a few microfarads and rated for the high-side power supply voltage. Connect the capacitor's other end to the high-side FET or IGBT.
Signal Input Management
The IR2106S has two inputs for controlling the high and low sides. These inputs are used for the 2106S chip's half-bridge configuration. The high-side input is connected to the gate of the top FET or IGBT. Meanwhile, the low-side input is connected to the gate of the bottom.
Protection Features Utilization
The IR2106S chip has built-in protection features. These include under-voltage lockout (UVLO) and a dead-time control mechanism. Make sure the UVLO is set appropriately. The low-side power supply voltage has to be monitored and maintained above the threshold value.
Heat Management
The IR2106S may sometimes generate heat, especially at high currents.
Ensure proper heat sinking. This improves thermal dissipation to prevent damage to the chip.
The IR2106S chip offers various advantages like flexibility, durability, and performance. Here are some of the key benefits:
High Voltage Capability
This chip can tolerate a maximum voltage of up to 500 volts. This makes it ideal for applications in high-voltage environments. Besides, its high voltage endurance ensures reliable operation in power inverters and industrial motor drives.
Integrated Bootstrap Circuit
What is a bootstrap circuit? It is an electronic circuit that consists of a bootstrap capacitor and a diode. The chip has an integrated bootstrap circuit for high-side driving. This allows for a simple power supply arrangement. The bootstrap capacitor can charge the high-side driver during normal operation. This adds to the circuit's design efficiency.
Versatile Application
The IR2106S chip works well with many applications across multiple industries. These include robotics, renewable energy systems, and industrial automation. One key reason for its versatility is its ability to control both IGBTs and power MOSFETs. This makes it suitable for both high-power and low-power applications.
Compact Design
The compact design of the IR2106S chip eases its integration into various circuit boards. Since it is small in size, it occupies less space. This is especially important in applications with limited space.
Consumer-Friendliness
This smart electronic device is quite energy efficient. So, it contributes to reducing power consumption. Reduced energy costs are beneficial to users and the environment.
Reliability and Durability
The IR2106S chip has been manufactured to provide long-term reliability. This is particularly for applications like solar inverters and motor drives, which operate continuously. The components of the chip can withstand extreme temperatures and even conditions. So, it has a robust build that ensures it will operate reliably for a long time.
The chip is used in many industries. Some of these industries include the automotive, consumer electronics, and industrial automation industries. Other industries include military and aerospace, renewable energy, and robotics.
The power requirements vary depending on the application using the chip. For instance, the automotive applications usually require lower power. On the other hand, industrial and renewable energy applications typically need higher power. This is because the latter is used for processes that require a lot of energy. However, the IR2106S chip's power supply flexibility allows it to accommodate diverse power needs.
The chip does not require much maintenance to ensure long-term reliability. This is especially true for applications where the chip is used in a continuous operation. The only thing that has to be done is to ensure proper heat dissipation. This can be done by using heat sinks or fans. Also, occasionally monitoring the chip's performance is vital to ensure it can function correctly.
Yes, it can. The IR2106S chip has been designed to work in extreme temperatures. It has also been designed to work in the military and automotive industries. These two industries require components that can endure not-so-friendly environmental conditions. So, the chip's robust design and durability make it suitable for outdoor and critical environments.
