All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(1211 products available)
A din rail clock is a type of programmable time switch that is installed on a din rail. The gadget can control circuit activity by providing a power signal at a pre-proportioned time. These timers can be set to several time programs for weeks or specific days, leading to flexibility and practicality in time settings.
Consequently, this feature enables users to achieve precise control for various needs, ranging from energy-saving efforts to the scheduled functioning of mission-critical equipment. Some of the most commonly used types of Programmable Din Rail Timer include the following:
Mechanical Programmable Din Rail Timer
The mechanical Programmable din rail timer has a clockwork mechanism. This type of timer requires no power to operate; hence, it can be used when there is constant need to keep time. The mechanical MODEL can also be wound up to store energy, which will later be released to keep the device running for perhaps a few minutes during power failure.
Digital Programmable Din Rail Timer
Digital Programmable din-rail timers are electrical devices that can be set on digital logic circuits for time control. Digital timers are preferred over mechanical timers because their programming is more precise and can be more flexible in operations. Modern Digital Programmable Din Rail Timers are advanced computing and easy-to-use LCD devices, which can be operated using user interfaces for efficient time setting. The main qualities are accuracy, flexibility, and user-friendly interface.
Analogue Programmable Din Rail Timer
These timers have small clocks inside that allow users to set desired time intervals using rotation of their hands. The main advantage of Analogue Programmable Din Rail Timer Devices is their simplicity and ease of use. However, they are not accurate as digital devices.
Solar Programmable Din Rail Timer
Solar Programmable Din Rail Timer uses solar energy as their main power source. As long as there is sunlight, solar Programmable Din Rail Timers will function effectively. These timers mainly find applications in remote areas or regions with no reliable source of electricity to enable their use.
Three Phase Programmable Din Rail Timer
These Programmable Din Rail Timers are used with three-phase electrical systems to control the on and off periods of electrical loads. The main advantage of having a three-phase programmable timer is that it helps in load balancing. This is important when running motors or any other heavy machinery because they equally share electrical power to avoid inefficiencies.
Hydraulic Programmable Din Rail Timer
A Hydraulic programmable din rail timer is an automatic device that works on the hydraulic principle to set interval times for prescribed operations. These timers are commonly used in electric and mechanical systems in industries such as metal forming, mining, and manufacturing.
Energy Management Systems
A Programmable din rail timer is widely applied in the industrial energymanagement systems to control the equipment's operating time. These timers can schedule equipment to operate during off-peak power periods to lower electricity costs.
HVAC Systems Control
In industrial settings, HVAC systems are large and complex. HVAC systems are heating, ventilation, and air conditioning systems that provide comfort and climate control. A Programmable din rail timer can help improve efficiency by scheduling these systems to run only when needed, thus saving energy.
Motor Control and Load Switching
In industries, large electric motors are commonly used for heavy operations. Motor control is one of the main purposes behind installing Programmable din rail timer. These timers schedule these motors to start and stop at defined times, thus achieving load proportioning and preventing the overused of electrical systems.
Process Automation
Timers are important in industries that carry out process automation to enable synchronization of different process stages. A Hydraulic Programmable din rail timer makes it possible to schedule events such as equipment operation, chemical dosing, or material transportation. This automated process improves consistency while reducing labor costs and human errors.
Lighting Control
Lighting is a basic requirement when operating an industry, and large industrial facilities use Programmable din rail timers to control their lighting systems. Timers schedule the switching on and off of lights in certain areas which are most affected by daylight.
Backup Systems and Safety Precautions
In many industrial systems, mainly those that are very critical, safety precautions and backup power systems are very important. Programmable din rail timers are used in this area to ensure that backup generators or safety systems are ready to operate at the right time when required. For example, a Digital Programmable din rail timer can monitor the state of the main power supply and then switch a backup generator after a predefined time in order to bring operational continuity.
Time Programming
These timers are capable of weekly or daily time schedule programming for up to 12. It Meets the intended power needs of users by enabling multiple time settings. Modern digital devices have different time periods that can be programmed to switch on and off.
Load Capacity
The load capacity concerns the amount of electrical power that the Programmable din rail timer can handle in a safe manner. Most industrial-grade models have high load capabilities.
Accuracy
The accuracy of the device is mainly defined by how well it can keep time compared with any other clock. Digital Programmable din rail timers have better accuracy compared with analogue timers.
Display Type
Analog displays show time settings and operational modes by time movement of hands on a clock. On the other hand, digital displays are LCD screens that show time and working status and allow an easy interface for setting the timer.
A Programmable din rail timer should always be installed with safety precautions put in place. The steps should include the following:
Prepare the DIN Rail
This step involves determining the location of the installation and then preparing the DIN rail by ensuring that it is clean and free from any debris. The rail should be level and should not have any obstructions that would prevent the installation of the timer.
Attach the Timer to the DIN Rail
The back of the mechanical, digital, and hydraulic programmable din rail timer has clips that allow them to be mounted on a DIN rail easily. It should then be pressed or slid into the place to enable the clips to snap on the rail securely.
Wiring the Timer
The next step is wiring the din rail timer, which involves connecting the power and load wires to the right terminals. It should be ensured that all the wires are connected when there is an electrical disconnect close by.
Secure and Test
Once the wiring is complete, all the screws have to be tight to secure the connections. After this, the power should be turned on, and the timer should be tested to see if it will work in the desired program.
The use of Programmable DIN rail timers is conditional upon the application where they are needed, and they can be flexible in industries. Below are some usage guidelines:
Programming Weekly Schedules
The digital programmable din rail timer can be set to operate certain electrical appliances or machinery at specific times during the week and days. Moving through the LCD interface allows time set for on/off periods for each day of the week.
Energy Saving in Industrial
These Programable timers are set to turn off lights, HVAC systems, and other equipment after working hours to avoid wastage of energy.
Motor Control Activation
Industrial Programmable din rail timer is useful in controlling large motors, for instance, scheduling start-up times during working hours and stopping them during off-peak hours.
Lighting Automation
These timers can control the automation of industrial lighting systems, which will then switch on only in the working hours and switch off automatically when there is enough natural light.
For optimal functioning, maintenance, and care are important in programmable din rail timers. Some maintenance steps include:
Regularly Cleaning the Unit
Dust and debris might cause the unit's internal components to be affected if they are not regularly cleaned. A soft brush or compressed air will do the job, but this will only be done after the power has been disconnected.
Checking for Firmware Updates
If the timer is digital, the manufacturer may provide firmware updates for improving functionality or correcting bugs. This should be done occasionally.
Inspecting for Damage
Regular inspection of the timer for any signs of wear, damage, or overheating will be good. This can include checking wiring, screen displays, and housings.
Testing the Settings
It may be important to test the programmed settings frequently to ensure that the timer is functioning correctly. This should be done periodically, such as beforeseasonal changes.
Calibration
To keep accuracy, it may also be necessary to periodically calibrate the timer, especially in highly sensitive applications. This could be checking time against an accurate source and adjusting as needed.
Professional Repairs
In case of malfunction, a digital Programmable din rail timer should be referred to a professional repair person.
Yes, a solar Programmable din rail timer is actually great for almost daily outdoor use, as it is designed and built to last under different weather conditions and has a solar power system to run it no matter what.
Firmware updates and regular maintenance ensure the accuracy of a programmable din rail timer because they help remove possible bugs and system errors.
Programmable Din Rail Timer is a mechanical or digital timer that works with and controls hydraulic systems by providing on-off signals based on set time intervals.
Digital Programmable din rail timers are accurate because of their precision technology, while analogue timers are less accurate due to their time mechanical movements.
