All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(28437 products available)
Regular spangle plain gi sheet price varries depending on the type and structure of these sheets, as outlined below.
This type of sheet comprises a single sheet of specified length and width. This can be a compact sheet suited for a small-sized structure. A large single-span sheet is also applicable for larger structures instead of multiple smaller sheets since a single sheet requires fewer joints to install.
A double-span sheet has the same features as the single-span sheet, but it is developed to be placed over two supports rather than a single intermediate one, thereby improving the load-carrying capacity in larger constructions.
An end-span sheet is intended for use at the terminating ends of a structural roof or floor system. In this case, the sheet is designed to be supported by just one end and the remainder overhangs beyond the supporting structure.
Intermediate-sheet GI sheets are developed to be placed between the end sheets and carry an equally distributed load. Such sheets typically have a smaller width compared to the end sheets. Like the double-span sheets, they are designed to fit between two supports at regular intervals.
As for the regular spangle sheets, these can be 'staggered' so that the joints between adjacent sheets do not align with one another. This kind of orientation aids in the even distribution of loads across the structure and is applied where required.
Some features that define regular spangle plain gi sheets include:
The zinc coating on gi sheets provides outstanding protection against corrosion. This allows the sheets to be durable and ideal for outdoors and challenging environments.
The regular spangle feature can be understood as the size and consistency of the 'spangles' or, in other words, the crystalline growth of zinc crystals that would appear on the coated surface after galvanization. The spangles can be larger and more uniform than on the reduced spangle GI sheets as a result of the type of galvanization process, which affects the aesthetic view and inhibits the further performance - the more regular the spangle is, the better appearance and protection from rusting.
Regular spangle gi sheets have a noted plain finish, which makes them smoothly and evenly flat. This aids in the even distribution of paints and other coatings and has a plain finish that looks much better than a corrugated or patterned surface.
These gi sheets are manufactured from several strengths of mild steel. At the same time, it supports different load structures and possesses flexibility, making it easy to bend and shape for construction purposes.
Galvanized iron sheets are good at both thermal and electrical conductivity, considering the zinc coating. This can be beneficial if the sheets are used in roof construction to help regulate temperature.
These GI sheets can have multiple applications, including:
Regular spangle plain gi sheets are used widely for roofing since they are resistant to water and rust and offer protection against an array of climatic elements. Their strength and lightness allow them to be installed easily in various residential and commercial buildings.
Due to its resistance to corrosion, gegular spangle gi sheet is suitable for cladding and side-walling, which are exposed to high humidity or saline atmosphere, such as coastal regions. Their strength makes them able to serve as a protective and load-bearing wall structure.
Galvanized iron sheets are usually used for constructing garden sheds, storage sheds, and garages used to house vehicles, tools, and equipment. Their durability enables them to safely store items without the risk of rust or weather-related deterioration.
These sheets can also be manufactured into containers for transporting goods, especially in hostile marine and weather environments. The zinc coating helps against the moisture that interacts with the materials inside the container.
Regular spangle GI sheets can be used for fencing and security screens. They can be long-lasting and afford clear visibility, as well as a barrier against a variety of weather elements.
The sheets are louvered or ventilated windows and openings, which allow air circulation while providing a barrier against rain and other elements. Their endurance quality means they will continue to function even under constant environmental exposure.
The performance of regular spangle plain gi sheets relies on a number of important factors, such as their physical structure and the kind of mild steel, as well as how they are maintained and taken care of. Some of these include:
This represents the amount of zinc deposited on the sheet, typically measured in grams per square meter (g/m²). A higher zinc coating value gives enhanced corrosion resistance and longer life to the sheet. Going through the average values of zinc coatings, multi-span applications or very corrosive environments may require a higher end value.
The thickness of the gi sheet is also an important factor. While a thicker sheet offers better strength and load-carrying ability, a thinner sheet is lighter and allows for more simple and easy handling.
The total coating is expressed as the value of zinc on both the outer and inner sides of the sheet after the galvanization process. Coating on both sides of the sheet is widely done for better protection against corrosion.
Io keep its protective qualities, the GI sheet must be washed on a regular basis, particularly in highly industrialized or coastal areas. `Washing off accumulated dirt, salts, and corrosive substances prevents the early onset of rust. Close observations should be made on the sheets for any exposed areas of zinc. In case the areas are few or have been eroded, repainting or re-coating with zinc-rich primer is necessary to enhance the further life of the sheet.
Periodic inspections, as well as maintenance of the gi sheets, are important, especially on roofs or structures that are difficult to access. Any sign of blistering, flaking, or peeling of the zinc layer should be addressed immediately to prevent the advent of rust. Additionally, mechanical damages like dents or scratches can also expose more of the steel to rusting, which may require repair or covering the affected area.
Here are some important factors business owners should consider when investing in large quantities of regular spangle plain GI sheets.
Business owners should look for regular spangle GI sheets made of quality steel. The sheets should be galvanized with a uniform and high-quality zinc coating for effective rust and corrosion resistance.
Buyers should settle for sheets with good workability. Such sheets can be cut, bent, and formed easily for a variety of projects.
The sheets are set to have larger spangles compared to reduced counterparts. Buyers should consider the aesthetic value of the sheets as well as increased durability and enhanced corrosion protection.
If applicable, buyers should settle for regular spangle plain GI sheets with standardized sizes and thicknesses to determine compatibility with existing structures.
In this age and time, brand reputation is a reliable determinant of quality. Therefore, buyers should purchase regular spangle GI sheets from well-known brands with a long-standing reputation for quality in the sheet metal industry.
Business owners should get plain regular spangle sheets that have a smooth finish. The sheets have a rough and unattractive appearance, making it unsuitable for projects where aesthetics matter. Also, when buying in bulk, business owners should consult manufacturers for customized sheets with unique finishes.
In as much as business owners should look for cost-effective sheets, they should also ensure the prices do not compromise quality. Stock availability should be a priority. That is, business owners should buy the sheets from suppliers that can guarantee a consistent and reliable supply to forestall any imminent future projects.
Since regular spangle sheets are meant to be used for roofing and exterior applications, business owners should ensure they have high corrosion resistance. The sheets should be made of galvanized steel with a uniform zinc coating.
Buyers should get sheets with a standard zinc coating that will ensure long-lasting corrosion protection. As a guide, for typical applications, a thickness of at least 120 grams per square meter is sufficient.
To ensure different applications, business owners should look for GI sheets that can easily be formed or bent without the risk of cracking, given that they intend to use them for roofing purposes.
Business owners intending to use the sheets for construction purposes should look at the load capacity and ensure that the sheets are strong and can handle heavier loads without deformation.
A1. The most effective method of checking the coating thickness is through third-party testing. The sheets are taken to a certified laboratory for testing, where they are weighed, then analyzed to calculate the coating thickness.
A2. It is worth noting that zinc provides good corrosion protection, making pre-treatment necessary before painting to enhance adhesion. One way to do this is by washing with a zinc sol to ensure good paint adhesion.
A3. Regular spangle sheets are intended for practical uses, so their aesthetic value will diminish over time. They will start rusting and become corroded, which will negatively affect their durability and structural integrity.
A4. Just like any other metal sheets, regular spangle GI sheets can be recycled. They will, however, need to have any non-metal notes removed and cleaned of any hazardous substances to allow for safe recycling.
A5. Rust prevention of regular spangle GI sheets depends on the quality and uniformity of the zinc coating as well as the environment. They provide adequate rust prevention, given that the zinc coating is uniform and of good quality, especially for outdoor applications and those exposed to humid or corrosive environments.
