All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier

About table edge router bits

Types of table edge router bits

Suppliers of table edge router bits in bulk should consider the various types that wholesalers might require, as each type caters to different functional and aesthetic edge-finishing needs.

  • Round nose bits

    These bits are designed to create a rounded edge by removing material from the edge of the workpiece, leaving a smooth, curved profile. They are also known as radii bits or roundover bits. This makes them ideal for softening sharp corners on tabletops, cabinet doors, and shelves. Round nose bits are often used in boat building and instrument making due to their ability to create comfortable, ergonomic rounded surfaces.

  • V-bits

    The v-bits tool produces a pointed profile by cutting a V-shaped groove or line into the material. This feature makes them ideal for engraving, inlay work, or decorative edges. The angle of the v-bit's tip can vary, usually between 60 and 90 degrees, allowing for different groove depths and widths. V-bits are often applied in signage, furniture detailing, and artistic woodworking projects.

  • Bullnose bits

    Bullnose bits feature a flat bottom with a rounded edge, allowing the bit to carve a combined radius and flat profile into an edge. The unique design makes it possible to cut a rabbet that integrates a rounded corner into a worked edge. The bit is commonly used in producing detailed panels, decorative moldings, and rounded flat surfaces on furniture tops. This way, bullnose bits are generally searched for in projects requiring sophisticated transitions between flat surfaces and edges.

  • Cove bits

    A cove bit creates a concave groove or recess along the edge of the material by using its rounded edge. This allows craftsmen to cut decorative, inward curves into panel edges, giving a refined, sunken appearance. Cove bits are ideal for producing moldings, chair rails, and other trim applications in cabinetry and architectural millwork.

  • Chamfer bits

    These bits remove an angled section from the edge of a workpiece, thus producing a flat facet that breaks the sharp edge. They are labeled by their bevel degree – common angles, are 22.5°, 45°, and 60°. Chamfer bits are frequently used in furniture, cabinets, and frames, producing a professional finish and preventing edge damage during handling.

  • Rabbeting bits

    These bits are designed to cut a rabbet joint, which consists of a recess along the edge of a workpiece. The removable core allows another piece of wood to fit flush with the rabbet, thus making them ideal for plywood edges, back panels, and frame constructions. Rabbeting bits are a must-have for router tables when carrying out window and door frames and various joinery applications.

Material & Durability of table edge router bits

Table edge router bits are made using different materials, which not only influence the performance, but durability, and application of the bits.

  • Tungsten Carbide Tipped (TCT) Bits

    Tungsten carbide-tipped bits are the most common router bits used in woodworking, as they combine toughness with exceptional hardness. This will then allow the tips to maintain a sharp edge, even with frequent edge profiling of hardwoods, softwoods, and laminates. The carbide tips endure heat generated by prolonged routing, thus preventing them from dulling quickly. TCT bits are often preferred for professional applications and possibly for woodworkers demanding versatility and longevity.

  • High-Speed Steel (HSS) Bits

    These bits are made from steel alloys and are extremely sharp, tough, and heat-resistant. HSS bits are ideal for vehicles working on softer materials like MDF and softer woods. Although they are not as durable as TCT bits, they are cheaper and provide good performance, especially for light or intermittent use. They are often fit for hobbyists or small shops mainly working on less dense materials.

  • Solid Carbide Bits

    Known as the toughest, these bits consist of solid carbide and manufactured to resist wear, breakage, and heat generation. Though expensive, they are utilized in CNC routers for precise cuts. Well-known for their ability to cut hard materials, such as hardwoods, composites, and even non-wood materials like plastics and aluminum. Solid carbide bits are normally selected by experts for precision routing or when cutting extremely hard materials.

  • Cobalt-Enhanced Steel Bits

    These bits are made from steel alloys with cobalt added in for strength and heat resistance. They work best during intermittent routing -great for softer woods - but wear less than standard HSS bits under high stress. Cobalt-enhanced bits are often favored for machining ia materials that generate excessive heat. This gives them an ideal fit for metalworking or composite cutting.

Scenarios of table edge router bits

Table edge router bits are specially designed to perform multiple tasks in terms of finishing edges to achieve the desired fancy look.

  • Roundover Bits

    They are typically used to soften sharp edges of tabletops, cabinet doors, and furniture trim. This gives the finished product a more professional appeal and reduces the sharpness for better ergonomics. They are therefore ideal for producing rounded furniture edges.

  • Beading Bits

    These bits are installed on routers and used to cut a decorative groove along the edge of a panel or molding to produce beaded edges. Beading bits are equally used in cabinetry to add decorative profiles to shelves, door frames, and drawer fronts. This feature enhances the visual appeal and quality of the finished work.

  • Chamfer Bits

    Commonly found on countertop tables, these bits are used to cut beveled edges that break sharp corners at specific angles. This gives a clean, angled finish that reduces edge chipping while providing a sleek, modern look. Chamfer bits are prevalent in contemporary furniture designs and architectural moldings.

  • Cove Bits

    They produce a carved, concave edge, which is nice on shelving, ceiling edges, and window trims. Cove bits add a classical touch to moldings, chair rails, and wainscotting designs. This allows for inward curves that distinguish decorative trim in wall applications and furniture designs.

  • Rabbeting Bits

    Families with these bits make rabbet joints, which are recessed edges allowing another piece of wood to fit snugly, normally used in the plywood edge. It is ideal for furniture construction where two pieces of wood need to be joined with flush edges. The rabbits also play a vital role in door and window framing by providing strong, interlocking joints.

How To Choose the table edge router bits

Buyers should have these strategies in mind to help select the edge router bits that will suit their customers’ needs.

  • Router bit sets

    If buyers get a router bit set, they should ensure that the bits in the set are suitable for edge work. These sets often contain various bits, such as roundovers, chamfers, and coves, which are perfect for edge profiling. Picking a set with bits of varying diameters and cutting depths will make the bits versatile for different wood types and projects. Getting a mixed material carbide tip and HSS bits set will ensure that the set is useful for many projects.

  • Profile and finish

    Buyers should focus more on the type of profiled router bits their customers need for the target projects. Please get round-over bits and v-groove bits to make the customers covet bevels and rounded edges. Likewise, take in beading and fluted bits for decorative grooves and carvings. The finish of the bits, such as carbide-tipped or solid carbide, mainly influences the bit's quality and durability.

  • Compatibility

    Buyers should pay attention to the shaft diameter of the router bits to ensure they fit in standard routers. Both half-inch and quarter-inch bits are ideal for many routers. Nevertheless, the diameter should match the type of router the end users have. Buyers should also ensure that any router bit they buy is compatible with a plunge or fixed-base router. Generally, bit diameter affects the depth of the cut.

  • Woodworking requirements

    If the customers' projects are simple and they use softwood, buyers should get them single profile bits for light tasks. Also, if their projects include hard wood and require a more complex routing task, they should use combination bits and router bit templates. Those who work with laminate or composite often use carbide-tipped bits, as they are the most durable.

  • Woodworking tools

    Buyers should ensure that the router bits they buy are suitable for their customers' routers. If their customers intend to use a CNC machine, they should get bits with shanks of reduced diameters. For big routers, prefer bits with wider shaft diameters, as they will handle big projects. Also, consider bits made with solid carbide for high-speed routers.

Q&A

Q1: Which edge router bits are the most versatile?

A1: Tungsten carbide-tipped bits are the most versatile and commonly used since they are tough and stay sharp for long. They are handy when working with hard and soft wood and laminated.

Q2: What type of wood should buyers recommend their customers to use high-speed steel bits on?

A2: High-speed steel bits are ideal for users working on softer wood because they are easy to sharpen.

Q3: What factors should buyers consider when purchasing router bits for their customers?

A3:Buyers should consider the type of router their customers will use, the projects' nature, and the wood type at hand when getting them.

Q4: Which edge router bits are ideal for CNC machinery?

A4:Solid carbide bits are great for CNC routers because they can handle high-speed machining. These bits are also perfect for hard wood and other tough materials.

Q5: How can customers maintain their edge router bits?

A5:Customers should routinely clean their bits after each use, store them separately in a dry place, and use a bit carrier to protect the cutting edges.

Q6:When should customers replace their carbide-tipped bits?

A6:Customers should replace their bits after numerous sharpening or when the carbide tips have worn down, therefore not producing accurate cuts anymore.