All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(231 products available)
Ready to Ship
Ready to Ship
Ready to ShipVeeJet nozzles are used as they offer a distinct spray characteristic, making them suitable for various industrial applications. Below are some common types defined by their angle and size.
VeeJet Nozzle type divides into these two categories based on their spray angle and flow rate:
Spray Angle Variation
The VeeJet nozzles are available in different spray angles, generally ranging from 30° to 110°. The smaller the spray angle, the focused the VeeJet will be, hence better for processes that require intensive cleaning or washing, like removing stubborn deposits. Conversely, larger spray angles are well suited for tasks that need wider coverage and lighter impacts, such as pre-washing surfaces or applying chemicals across broad areas.
Fan-Spray Nozzles
These are designed to produce a flat, fan-shaped spray pattern rather than a circular one. This unique characteristic allows the fan spray nozzles to distribute liquids more evenly across surfaces. The flat spray is more effective and ideal for surface treatment, dust control, and agricultural applications, among others. Depending on their size and flow rate, fan-spray VeeJet nozzles can be fine-tuned to particular widths and lengths of coverage.
VeeJet Nozzle Size
VeeJet nozzles come in a range of sizes, designated by numbers such as 0.5, 1.0, 1.5, and up to 6.0. The size corresponds to the orifice diameter; larger sizes will produce a larger spray pattern. This will be relevant since, for any given application, selecting the appropriate size is crucial in attaining both safety and efficiency. A mixing application, where one needs to blend components for uniformity, requires a small size to avoid the components settling at the bottom of the container. In cleaning applications, larger sizes create more forceful jets, increasing the washing speed.
Flow Rate
The flow rate through a VeeJet nozzle is significant as it directly affects the amount of liquid that is sprayed per minute. This is usually expressed in gallons per minute (GPM). The flow rate is determined by the size of the nozzle and the pressure of the pump behind it. Applications requiring higher liquid volumes or longer operational times need nozzles with higher flow rates. However, in cases where chemicals need to be applied sparingly or where water recycling is ongoing, choose a nozzle with a lower flow rate.
VeeJet Nozzle Material
VeeJet nozzles are fabricated to feature differing materials that provide compatibility with specific liquids or operating conditions. Typical materials include brass, stainless steel, and plastic. Brass nozzles are strong and corrosion-resistant, but they could wear down if exposed to abrasive substances. Stainless steel is reserved for use in conditions that require premium resistance to corrosion and heat, particularly in chemical processing or food and beverage industries.
Material Quality
VeeJet nozzles are constructed using tough materials, usually brass, stainless steel, and plastic, each tailored for specific purposes. This ensures that VeeJet spray nozzles can withstand daily demands in whatever field.
Abrasive Resistance
Many industrial applications contain liquids with suspended solids, which might be termed abrasive. These can cause wear and tear on lesser quality nozzles. VeeJet nozzles are specifically designed to resist abrasion through combustion or chemical means. Stainless steel VeeJet nozzles are a common preference for this particular application because of their high levels of resistance to both abrasion and corrosion.
Shock and Impact
In high-pressure or high-impact cleaning applications, the nozzles may be subject to severe shocks. Veejet nozzles are designed to absorb such shocks without getting deformed or damaged. This keeps performance intact even under rugged conditions. This is a vital factor in maintaining what is called interchangeability, where one can replace one part with another without compromising overall quality and service.
Unique Spray Pattern
A distinguishing feature of VeeJet nozzles from the other common kinds is the broad, fan-shaped, hollow-cone spray pattern. This patent-registered feature ensures the VeeJet nozzles efficiently cover wide areas with water or liquids while maintaining a low flow rate.
Versatile Applications
VeeJet nozzles are useful in cleaning, watering crops, dust suppression, and mixing chemicals across industries. Their unique shape will concentrate liquids on surfaces, making them workable in tasks like washing industrial machinery down to agricultural crop irrigation.
Customizable Specifications
These nozzles come in several spray angles, sizes (based on flow rates), and material compositions. This will allow one to personalize them according to whatever application-related need there is, whether it is pressure targets, liquid types, or environmental conditions.
Efficient Design
The hollow-cone spray pattern is designed to optimize liquid distribution across surfaces. It achieves maximum coverage with minimal waste.
Easy Installation and Replacement
This particular feature makes the use of VeeJet nozzles popular because one can easily install and replace them. This ease is critical when there is a need to perform maintenance or upgrade a system with little to no disruption of regular tasks.
Durable Construction
Brass, stainless steel, and wear-resistant plastics ensure long-lasting service under diverse environments, ranging from chemical exposure to high pressures and temperatures. Because they are so sturdy, they can be fitted and utilized in different conditions and for various applications.
Industrial Cleaning Applications
In industrial cleaning, VeeJet nozzles are useful when they clean machinery and equipment. Their broad spray pattern helps remove tough, leftover deposits faster and covers larger surfaces without using much water. This efficiency increases the rate of cleaning and makes the work environment safer.
Agricultural Irrigation Systems
VeeJet nozzles are ideal for irrigation in agriculture due to their adjustable spray patterns. These allow farmers to distribute water and chemicals, such as fertilizers and pesticides, uniformly over large crop fields. Enhanced crop health results from better coverage, and resource efficiency is achieved, reducing water and chemical wastage.
Dust Control on Construction Sites
VeeJet nozzles help suppress dust on construction sites, making the work environment safer for the workers and the air quality better, reducing risk. Their ability to form a fine mist eliminates airborne particles without saturating the ground and thus allows operations to continue without hindering visibility or creating health hazards.
Oil and Gas Industry
Oil and gas industries face many tough cleaning tasks, such as tanks, pipelines, and other structures. The high-pressure VeeJet nozzles are perfect for this as they can break down stubbornly sticky materials. Furthermore, their durable construction means that even in highly abrasive or chemical-dependent situations, they can clean effectively while lasting a long time.
Surface Coating and Painting
In surface coating, such as painting or applying protective chemicals, consistent application is paramount. Varieties of VeeJet nozzles remain effective as they atomize these substances into a fine mist. This helps in even deposition, reducing wastage, and ensures premium finish quality on varying surfaces, be they flat or intricate. Depending on the situation, the user chooses the one that gives them the best results: hollow-cone or solid-cone VeeJet nozzles.
Application Requirements
Consider the specific requirements of the intended job. Cleaning industrial equipment requires a narrower spray for better penetration; farmers need a wider cone to water fields. The VeeJet& nozzle spray pressure will affect the size required for every application.
Flow Rate and Pressure
Bear in mind the nozzle's flow rate and pressure tolerances. Nozzles must meet the pressure limits of the pumps to avoid breakage. Also, select flow rates that match available water or liquid supplies without exceeding efficiency or causing wastage.
Material Compatibility
VeeJet materials determine the types of liquids in which they can be compatible. While brass nozzles are suitable where VeeJet nozzle users operate chemicals with low a chemical concentration, stainless steel is better suited for highly aggressive chemicals. In irrigation, plastic VeeJet nozzles do well with fertilizers and pesticides due to their corrosion-resistant properties.
Adjustable Nozzles
Where jobs frequently change or are varied, consider getting adjustable or interchangeable VeeJet nozzles. These accessories make it possible to vary the spray angle and width, thereby providing flexibility in tasks like cleaning large spaces and small corners.
Ease of Maintenance
Nozzles, particularly those for use in industrial applications, should be easy to maintain. VeeJat nozzles require simple maintenance for effective performance. Opt for nozzles with easy access for cleaning or replacement.
A.VeeJet nozzles are constructed to be used with various liquids. These range from water for general cleaning to hazardous chemicals in varying industries. Materials that make these nozzles include brass for tabling moderate chemical environments and stainless steel for highly corrosive chemicals. Select the one most suitable for its compatible environment.
A.The spray angle determines liquid distribution over surfaces. Cleaning machinery requires a small angle to direct concentrated liquid of chemicals toward particles. Pre-washing large areas flat surfaces need a wide spray angle to cover quickly. The right angle ensures efficiency and effectiveness for every application.
A.The nozzle size depends on flow rate and operating pressure. Large tasks that need more liquid volume require big sizes, while small cleaning jobs need small sizes. Make sure the nozzle size matches the pump pressure for effective performance, lest there be inefficiency.
